Sigurnosni nedostaci programskog paketa wpa supplicant

Detalji os-a: WN7
Važnost: IMP
Operativni sustavi: L
Kategorije: LSU

openSUSE Security Update: Security update for wpa_supplicant
______________________________________________________________________________

Announcement ID: openSUSE-SU-2020:2059-1
Rating: moderate
References: #1131644 #1131868 #1131870 #1131871 #1131872
#1131874 #1133640 #1144443 #1150934 #1156920
#1166933 #1167331 #930077 #930078 #930079

Cross-References: CVE-2015-4141 CVE-2015-4142 CVE-2015-4143
CVE-2015-8041 CVE-2017-13077 CVE-2017-13078
CVE-2017-13079 CVE-2017-13080 CVE-2017-13081
CVE-2017-13082 CVE-2017-13086 CVE-2017-13087
CVE-2017-13088 CVE-2018-14526 CVE-2019-11555
CVE-2019-13377 CVE-2019-16275 CVE-2019-9494
CVE-2019-9495 CVE-2019-9497 CVE-2019-9498
CVE-2019-9499
Affected Products:
openSUSE Leap 15.2
______________________________________________________________________________

An update that fixes 22 vulnerabilities is now available.

Description:

This update for wpa_supplicant fixes the following issues:

Security issue fixed:

– CVE-2019-16275: Fixed an AP mode PMF disconnection protection bypass
(bsc#1150934).

Non-security issues fixed:

– Enable SAE support (jsc#SLE-14992).
– Limit P2P_DEVICE name to appropriate ifname size.
– Fix wicked wlan (bsc#1156920)
– Restore fi.epitest.hostap.WPASupplicant.service (bsc#1167331)
– With v2.9 fi.epitest.hostap.WPASupplicant.service is obsolete
(bsc#1167331)
– Fix WLAN config on boot with wicked. (bsc#1166933)
– Update to 2.9 release:
* SAE changes
– disable use of groups using Brainpool curves
– improved protection against side channel attacks
[https://w1.fi/security/2019-6/]
* EAP-pwd changes
– disable use of groups using Brainpool curves
– allow the set of groups to be configured (eap_pwd_groups)
– improved protection against side channel attacks
[https://w1.fi/security/2019-6/]
* fixed FT-EAP initial mobility domain association using PMKSA caching
(disabled by default for backwards compatibility; can be enabled with
ft_eap_pmksa_caching=1)
* fixed a regression in OpenSSL 1.1+ engine loading
* added validation of RSNE in (Re)Association Response frames
* fixed DPP bootstrapping URI parser of channel list
* extended EAP-SIM/AKA fast re-authentication to allow use with FILS
* extended ca_cert_blob to support PEM format
* improved robustness of P2P Action frame scheduling
* added support for EAP-SIM/AKA using anonymous@realm identity
* fixed Hotspot 2.0 credential selection based on roaming consortium to
ignore credentials without a specific EAP method
* added experimental support for EAP-TEAP peer (RFC 7170)
* added experimental support for EAP-TLS peer with TLS v1.3
* fixed a regression in WMM parameter configuration for a TDLS peer
* fixed a regression in operation with drivers that offload 802.1X
4-way handshake
* fixed an ECDH operation corner case with OpenSSL
* SAE changes
– added support for SAE Password Identifier
– changed default configuration to enable only groups 19, 20, 21
(i.e., disable groups 25 and 26) and disable all unsuitable groups
completely based on REVmd changes
– do not regenerate PWE unnecessarily when the AP uses the
anti-clogging token mechanisms
– fixed some association cases where both SAE and FT-SAE were enabled
on both the station and the selected AP
– started to prefer FT-SAE over SAE AKM if both are enabled
– started to prefer FT-SAE over FT-PSK if both are enabled
– fixed FT-SAE when SAE PMKSA caching is used
– reject use of unsuitable groups based on new implementation
guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC
groups with prime >= 256)
– minimize timing and memory use differences in PWE derivation
[https://w1.fi/security/2019-1/] (CVE-2019-9494, bsc#1131868)
* EAP-pwd changes
– minimize timing and memory use differences in PWE derivation
[https://w1.fi/security/2019-2/] (CVE-2019-9495, bsc#1131870)
– verify server scalar/element [https://w1.fi/security/2019-4/]
(CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872,
bsc#1131871, bsc#1131644)
– fix message reassembly issue with unexpected fragment
[https://w1.fi/security/2019-5/] (CVE-2019-11555, bsc#1133640)
– enforce rand,mask generation rules more strictly
– fix a memory leak in PWE derivation
– disallow ECC groups with a prime under 256 bits (groups 25, 26, and
27)
– SAE/EAP-pwd side-channel attack update
[https://w1.fi/security/2019-6/] (CVE-2019-13377, bsc#1144443)
* fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y
* Hotspot 2.0 changes
– do not indicate release number that is higher than the one AP
supports
– added support for release number 3
– enable PMF automatically for network profiles created from
credentials
* fixed OWE network profile saving
* fixed DPP network profile saving
* added support for RSN operating channel validation (CONFIG_OCV=y and
network profile parameter ocv=1)
* added Multi-AP backhaul STA support
* fixed build with LibreSSL
* number of MKA/MACsec fixes and extensions
* extended domain_match and domain_suffix_match to allow list of values
* fixed dNSName matching in domain_match and domain_suffix_match when
using wolfSSL
* started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both
are enabled
* extended nl80211 Connect and external authentication to support SAE,
FT-SAE, FT-EAP-SHA384
* fixed KEK2 derivation for FILS+FT
* extended client_cert file to allow loading of a chain of PEM encoded
certificates
* extended beacon reporting functionality
* extended D-Bus interface with number of new properties
* fixed a regression in FT-over-DS with mac80211-based drivers
* OpenSSL: allow systemwide policies to be overridden
* extended driver flags indication for separate 802.1X and PSK 4-way
handshake offload capability
* added support for random P2P Device/Interface Address use
* extended PEAP to derive EMSK to enable use with ERP/FILS
* extended WPS to allow SAE configuration to be added automatically for
PSK (wps_cred_add_sae=1)
* removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS)
* extended domain_match and domain_suffix_match to allow list of values
* added a RSN workaround for misbehaving PMF APs that advertise
IGTK/BIP KeyID using incorrect byte order
* fixed PTK rekeying with FILS and FT
* fixed WPA packet number reuse with replayed messages and key
reinstallation [https://w1.fi/security/2017-1/] (CVE-2017-13077,
CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081,
CVE-2017-13082, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)
* fixed unauthenticated EAPOL-Key decryption in wpa_supplicant
[https://w1.fi/security/2018-1/] (CVE-2018-14526)
* added support for FILS (IEEE 802.11ai) shared key authentication
* added support for OWE (Opportunistic Wireless Encryption, RFC 8110;
and transition mode defined by WFA)
* added support for DPP (Wi-Fi Device Provisioning Protocol)
* added support for RSA 3k key case with Suite B 192-bit level
* fixed Suite B PMKSA caching not to update PMKID during each 4-way
handshake
* fixed EAP-pwd pre-processing with PasswordHashHash
* added EAP-pwd client support for salted passwords
* fixed a regression in TDLS prohibited bit validation
* started to use estimated throughput to avoid undesired signal
strength based roaming decision
* MACsec/MKA:
– new macsec_linux driver interface support for the Linux kernel
macsec module
– number of fixes and extensions
* added support for external persistent storage of PMKSA cache
(PMKSA_GET/PMKSA_ADD control interface commands; and
MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)
* fixed mesh channel configuration pri/sec switch case
* added support for beacon report
* large number of other fixes, cleanup, and extensions
* added support for randomizing local address for GAS queries
(gas_rand_mac_addr parameter)
* fixed EAP-SIM/AKA/AKA’ ext auth cases within TLS tunnel
* added option for using random WPS UUID (auto_uuid=1)
* added SHA256-hash support for OCSP certificate matching
* fixed EAP-AKA’ to add AT_KDF into Synchronization-Failure
* fixed a regression in RSN pre-authentication candidate selection
* added option to configure allowed group management cipher suites
(group_mgmt network profile parameter)
* removed all PeerKey functionality
* fixed nl80211 AP and mesh mode configuration regression with Linux
4.15 and newer
* added ap_isolate configuration option for AP mode
* added support for nl80211 to offload 4-way handshake into the driver
* added support for using wolfSSL cryptographic library
* SAE
– added support for configuring SAE password separately of the WPA2
PSK/passphrase
– fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection
for SAE; note: this is not backwards compatible, i.e., both the AP and
station side implementations will need to be update at the same time to
maintain interoperability
– added support for Password Identifier
– fixed FT-SAE PMKID matching
* Hotspot 2.0
– added support for fetching of Operator Icon Metadata ANQP-element
– added support for Roaming Consortium Selection element
– added support for Terms and Conditions
– added support for OSEN connection in a shared RSN BSS
– added support for fetching Venue URL information
* added support for using OpenSSL 1.1.1
* FT
– disabled PMKSA caching with FT since it is not fully functional
– added support for SHA384 based AKM
– added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128,
BIP-GMAC-256 in addition to previously supported BIP-CMAC-128
– fixed additional IE inclusion in Reassociation Request frame when
using FT protocol

– Changed service-files for start after network (systemd-networkd).

This update was imported from the SUSE:SLE-15:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– openSUSE Leap 15.2:

zypper in -t patch openSUSE-2020-2059=1

Package List:

– openSUSE Leap 15.2 (i586 x86_64):

wpa_supplicant-2.9-lp152.8.3.1
wpa_supplicant-debuginfo-2.9-lp152.8.3.1
wpa_supplicant-debugsource-2.9-lp152.8.3.1
wpa_supplicant-gui-2.9-lp152.8.3.1
wpa_supplicant-gui-debuginfo-2.9-lp152.8.3.1

References:

https://www.suse.com/security/cve/CVE-2015-4141.html
https://www.suse.com/security/cve/CVE-2015-4142.html
https://www.suse.com/security/cve/CVE-2015-4143.html
https://www.suse.com/security/cve/CVE-2015-8041.html
https://www.suse.com/security/cve/CVE-2017-13077.html
https://www.suse.com/security/cve/CVE-2017-13078.html
https://www.suse.com/security/cve/CVE-2017-13079.html
https://www.suse.com/security/cve/CVE-2017-13080.html
https://www.suse.com/security/cve/CVE-2017-13081.html
https://www.suse.com/security/cve/CVE-2017-13082.html
https://www.suse.com/security/cve/CVE-2017-13086.html
https://www.suse.com/security/cve/CVE-2017-13087.html
https://www.suse.com/security/cve/CVE-2017-13088.html
https://www.suse.com/security/cve/CVE-2018-14526.html
https://www.suse.com/security/cve/CVE-2019-11555.html
https://www.suse.com/security/cve/CVE-2019-13377.html
https://www.suse.com/security/cve/CVE-2019-16275.html
https://www.suse.com/security/cve/CVE-2019-9494.html
https://www.suse.com/security/cve/CVE-2019-9495.html
https://www.suse.com/security/cve/CVE-2019-9497.html
https://www.suse.com/security/cve/CVE-2019-9498.html
https://www.suse.com/security/cve/CVE-2019-9499.html
https://bugzilla.suse.com/1131644
https://bugzilla.suse.com/1131868
https://bugzilla.suse.com/1131870
https://bugzilla.suse.com/1131871
https://bugzilla.suse.com/1131872
https://bugzilla.suse.com/1131874
https://bugzilla.suse.com/1133640
https://bugzilla.suse.com/1144443
https://bugzilla.suse.com/1150934
https://bugzilla.suse.com/1156920
https://bugzilla.suse.com/1166933
https://bugzilla.suse.com/1167331
https://bugzilla.suse.com/930077
https://bugzilla.suse.com/930078
https://bugzilla.suse.com/930079
_______________________________________________
openSUSE Security Announce mailing list — security-announce@lists.opensuse.org
To unsubscribe, email security-announce-leave@lists.opensuse.org
List Netiquette: https://en.opensuse.org/openSUSE:Mailing_list_netiquette
List Archives: https://lists.opensuse.org/archives/list/security-announce@lists.opensuse.org

openSUSE Security Update: Security update for wpa_supplicant
______________________________________________________________________________

Announcement ID: openSUSE-SU-2020:2053-1
Rating: moderate
References: #1131644 #1131868 #1131870 #1131871 #1131872
#1131874 #1133640 #1144443 #1150934 #1156920
#1166933 #1167331 #930077 #930078 #930079

Cross-References: CVE-2015-4141 CVE-2015-4142 CVE-2015-4143
CVE-2015-8041 CVE-2017-13077 CVE-2017-13078
CVE-2017-13079 CVE-2017-13080 CVE-2017-13081
CVE-2017-13082 CVE-2017-13086 CVE-2017-13087
CVE-2017-13088 CVE-2018-14526 CVE-2019-11555
CVE-2019-13377 CVE-2019-16275 CVE-2019-9494
CVE-2019-9495 CVE-2019-9497 CVE-2019-9498
CVE-2019-9499
Affected Products:
openSUSE Leap 15.1
______________________________________________________________________________

An update that fixes 22 vulnerabilities is now available.

Description:

This update for wpa_supplicant fixes the following issues:

Security issue fixed:

– CVE-2019-16275: Fixed an AP mode PMF disconnection protection bypass
(bsc#1150934).

Non-security issues fixed:

– Changed service-files for start after network (systemd-networkd).

This update was imported from the SUSE:SLE-15:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– openSUSE Leap 15.1:

zypper in -t patch openSUSE-2020-2053=1

Package List:

– openSUSE Leap 15.1 (i586 x86_64):

wpa_supplicant-2.9-lp151.5.10.1
wpa_supplicant-debuginfo-2.9-lp151.5.10.1
wpa_supplicant-debugsource-2.9-lp151.5.10.1
wpa_supplicant-gui-2.9-lp151.5.10.1
wpa_supplicant-gui-debuginfo-2.9-lp151.5.10.1

References:

Autor	161.53.13.146
Cert id	NCERT-REF-2020-11-0001-ADV
Cve	CERT-CVE-DUMMY
ID izvornika	CERT-ORIGID-DUMMY
Proizvod	CERT-DUMMY-PRODUCT
Izvor	Adobe

Sigurnosni nedostaci programskog paketa wpa supplicant

Archives

More in Preporuke

Sigurnosni nedostaci programskog paketa Mozilla Firefox