SUSE Security Update: Security update for the Linux Kernel
______________________________________________________________________________

Announcement ID: SUSE-SU-2018:1221-1
Rating: important
References: #1076537 #1082299 #1083125 #1083242 #1084536
#1085331 #1086162 #1087088 #1087209 #1087260
#1088147 #1088260 #1088261 #1089608 #1089752
#1090643
Cross-References: CVE-2017-0861 CVE-2017-11089 CVE-2017-13220
CVE-2017-18203 CVE-2018-10087 CVE-2018-10124
CVE-2018-1087 CVE-2018-7757 CVE-2018-8781
CVE-2018-8822 CVE-2018-8897
Affected Products:
SUSE Linux Enterprise Server 12-LTSS
SUSE Linux Enterprise Module for Public Cloud 12
______________________________________________________________________________

An update that solves 11 vulnerabilities and has 5 fixes is
now available.

Description:

The SUSE Linux Enterprise 12 GA LTSS kernel was updated to receive various
security and bugfixes.

The following security bugs were fixed:

– CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to
potentially escalate their privileges inside a guest. (bsc#1087088)
– CVE-2018-8897: An unprivileged system user could use incorrect set up
interrupt stacks to crash the Linux kernel resulting in DoS issue.
(bsc#1087088)
– CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c
had an integer-overflow vulnerability allowing local users with access
to the udldrmfb driver to obtain full read and write permissions on
kernel physical pages, resulting in a code execution in kernel space
(bnc#1090643).
– CVE-2018-10124: The kill_something_info function in kernel/signal.c
might allow local users to cause a denial of service via an INT_MIN
argument (bnc#1089752).
– CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might allow
local users to cause a denial of service by triggering an attempted use
of the -INT_MIN value (bnc#1089608).
– CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in
drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial
of service (memory consumption) via many read accesses to files in the
/sys/class/sas_phy directory, as demonstrated by the
/sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536
1087209).
– CVE-2017-13220: An elevation of privilege vulnerability in the Upstream
kernel bluez was fixed. (bnc#1076537).
– CVE-2017-11089: A buffer overread was observed in nl80211_set_station
when user space application sends attribute
NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes
(bnc#1088261).
– CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function
in the ALSA subsystem allowed attackers to gain privileges via
unspecified vectors (bnc#1088260).
– CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel
function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious
NCPFS servers to crash the kernel or execute code (bnc#1086162).
– CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c
allow local users to cause a denial of service (BUG) by leveraging a
race condition with __dm_destroy during creation and removal of DM
devices (bnc#1083242).

The following non-security bugs were fixed:

– Integrate fixes resulting from bsc#1088147 More info in the respective
commit messages.
– KABI: x86/kaiser: properly align trampoline stack (bsc#1087260).
– kGraft: fix small race in reversion code (bsc#1083125).
– kabi/severities: Ignore kgr_shadow_* kABI changes
– kvm/x86: fix icebp instruction handling (bsc#1087088).
– livepatch: Allow to call a custom callback when freeing shadow variables
(bsc#1082299 fate#313296).
– livepatch: Initialize shadow variables safely by a custom callback
(bsc#1082299 fate#313296).
– x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
– x86/kaiser: properly align trampoline stack (bsc#1087260).
– x86/retpoline: do not perform thunk calls in ring3 vsyscall code
(bsc#1085331).

Patch Instructions:

To install this SUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– SUSE Linux Enterprise Server 12-LTSS:

zypper in -t patch SUSE-SLE-SERVER-12-2018-844=1

– SUSE Linux Enterprise Module for Public Cloud 12:

zypper in -t patch SUSE-SLE-Module-Public-Cloud-12-2018-844=1

Package List:

– SUSE Linux Enterprise Server 12-LTSS (ppc64le s390x x86_64):

kernel-default-3.12.61-52.128.1
kernel-default-base-3.12.61-52.128.1
kernel-default-base-debuginfo-3.12.61-52.128.1
kernel-default-debuginfo-3.12.61-52.128.1
kernel-default-debugsource-3.12.61-52.128.1
kernel-default-devel-3.12.61-52.128.1
kernel-syms-3.12.61-52.128.1

– SUSE Linux Enterprise Server 12-LTSS (noarch):

kernel-devel-3.12.61-52.128.1
kernel-macros-3.12.61-52.128.1
kernel-source-3.12.61-52.128.1

– SUSE Linux Enterprise Server 12-LTSS (x86_64):

kernel-xen-3.12.61-52.128.1
kernel-xen-base-3.12.61-52.128.1
kernel-xen-base-debuginfo-3.12.61-52.128.1
kernel-xen-debuginfo-3.12.61-52.128.1
kernel-xen-debugsource-3.12.61-52.128.1
kernel-xen-devel-3.12.61-52.128.1
kgraft-patch-3_12_61-52_128-default-1-1.3.1
kgraft-patch-3_12_61-52_128-xen-1-1.3.1

– SUSE Linux Enterprise Server 12-LTSS (s390x):

kernel-default-man-3.12.61-52.128.1

– SUSE Linux Enterprise Module for Public Cloud 12 (x86_64):

kernel-ec2-3.12.61-52.128.1
kernel-ec2-debuginfo-3.12.61-52.128.1
kernel-ec2-debugsource-3.12.61-52.128.1
kernel-ec2-devel-3.12.61-52.128.1
kernel-ec2-extra-3.12.61-52.128.1
kernel-ec2-extra-debuginfo-3.12.61-52.128.1

References:

https://www.suse.com/security/cve/CVE-2017-0861.html
https://www.suse.com/security/cve/CVE-2017-11089.html
https://www.suse.com/security/cve/CVE-2017-13220.html
https://www.suse.com/security/cve/CVE-2017-18203.html
https://www.suse.com/security/cve/CVE-2018-10087.html
https://www.suse.com/security/cve/CVE-2018-10124.html
https://www.suse.com/security/cve/CVE-2018-1087.html
https://www.suse.com/security/cve/CVE-2018-7757.html
https://www.suse.com/security/cve/CVE-2018-8781.html
https://www.suse.com/security/cve/CVE-2018-8822.html
https://www.suse.com/security/cve/CVE-2018-8897.html
https://bugzilla.suse.com/1076537
https://bugzilla.suse.com/1082299
https://bugzilla.suse.com/1083125
https://bugzilla.suse.com/1083242
https://bugzilla.suse.com/1084536
https://bugzilla.suse.com/1085331
https://bugzilla.suse.com/1086162
https://bugzilla.suse.com/1087088
https://bugzilla.suse.com/1087209
https://bugzilla.suse.com/1087260
https://bugzilla.suse.com/1088147
https://bugzilla.suse.com/1088260
https://bugzilla.suse.com/1088261
https://bugzilla.suse.com/1089608
https://bugzilla.suse.com/1089752
https://bugzilla.suse.com/1090643

—
To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org

SUSE Security Update: Security update for the Linux Kernel
______________________________________________________________________________

Announcement ID: SUSE-SU-2018:1220-1
Rating: important
References: #1076537 #1082299 #1083125 #1083242 #1083275
#1084536 #1085279 #1085331 #1086162 #1086194
#1087088 #1087260 #1088147 #1088260 #1088261
#1089608 #1089752 #1090643
Cross-References: CVE-2017-0861 CVE-2017-11089 CVE-2017-13220
CVE-2017-18203 CVE-2018-10087 CVE-2018-10124
CVE-2018-1087 CVE-2018-7757 CVE-2018-8781
CVE-2018-8822 CVE-2018-8897
Affected Products:
SUSE OpenStack Cloud 6
SUSE Linux Enterprise Server for SAP 12-SP1
SUSE Linux Enterprise Server 12-SP1-LTSS
SUSE Linux Enterprise Module for Public Cloud 12
______________________________________________________________________________

An update that solves 11 vulnerabilities and has 7 fixes is
now available.

Description:

The SUSE Linux Enterprise 12 SP1 LTSS kernel was updated to receive
various security and bugfixes.

The following security bugs were fixed:

– CVE-2018-1087: And an unprivileged KVM guest user could use this flaw to
potentially escalate their privileges inside a guest. (bsc#1087088)
– CVE-2018-8897: An unprivileged system user could use incorrect set up
interrupt stacks to crash the Linux kernel resulting in DoS issue.
(bsc#1087088)
– CVE-2018-8781: The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c
had an integer-overflow vulnerability allowing local users with access
to the udldrmfb driver to obtain full read and write permissions on
kernel physical pages, resulting in a code execution in kernel space
(bnc#1090643).
– CVE-2018-10124: The kill_something_info function in kernel/signal.c
might allow local users to cause a denial of service via an INT_MIN
argument (bnc#1089752).
– CVE-2018-10087: The kernel_wait4 function in kernel/exit.c in might
allow local users to cause a denial of service by triggering an
attempted use of the -INT_MIN value (bnc#1089608).
– CVE-2018-7757: Memory leak in the sas_smp_get_phy_events function in
drivers/scsi/libsas/sas_expander.c allowed local users to cause a denial
of service (memory consumption) via many read accesses to files in the
/sys/class/sas_phy directory, as demonstrated by the
/sys/class/sas_phy/phy-1:0:12/invalid_dword_count file (bnc#1084536).
– CVE-2017-13220: An elevation of privilege vulnerability in the Upstream
kernel bluez was fixed. (bnc#1076537).
– CVE-2017-11089: A buffer overread is observed in nl80211_set_station
when user space application sends attribute
NL80211_ATTR_LOCAL_MESH_POWER_MODE with data of size less than 4 bytes
(bnc#1088261).
– CVE-2017-0861: Use-after-free vulnerability in the snd_pcm_info function
in the ALSA subsystem allowed attackers to gain privileges via
unspecified vectors (bnc#1088260).
– CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel
function in fs/ncpfs/ncplib_kernel.c could be exploited by malicious
NCPFS servers to crash the kernel or execute code (bnc#1086162).
– CVE-2017-18203: The dm_get_from_kobject function in drivers/md/dm.c
allowed local users to cause a denial of service (BUG) by leveraging a
race condition with __dm_destroy during creation and removal of DM
devices (bnc#1083242).

The following non-security bugs were fixed:

– Integrate fixes resulting from bsc#1088147 More info in the respective
commit messages.
– kabi: x86/kaiser: properly align trampoline stack (bsc#1087260).
– dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
– kGraft: fix small race in reversion code (bsc#1083125).
– kabi/severities: Ignore kgr_shadow_* kABI changes
– kvm/x86: fix icebp instruction handling (bsc#1087088).
– livepatch: Allow to call a custom callback when freeing shadow variables
(bsc#1082299 fate#313296).
– livepatch: Initialize shadow variables safely by a custom callback
(bsc#1082299 fate#313296).
– usbnet: Fix a race between usbnet_stop() and the BH (bsc#1083275).
– x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
– x86/espfix: Fix return stack in do_double_fault() (bsc#1085279).
– x86/kaiser: properly align trampoline stack (bsc#1087260).
– x86/retpoline: do not perform thunk calls in ring3 vsyscall code
(bsc#1085331).

Patch Instructions:

To install this SUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– SUSE OpenStack Cloud 6:

zypper in -t patch SUSE-OpenStack-Cloud-6-2018-845=1

– SUSE Linux Enterprise Server for SAP 12-SP1:

zypper in -t patch SUSE-SLE-SAP-12-SP1-2018-845=1

– SUSE Linux Enterprise Server 12-SP1-LTSS:

zypper in -t patch SUSE-SLE-SERVER-12-SP1-2018-845=1

– SUSE Linux Enterprise Module for Public Cloud 12:

zypper in -t patch SUSE-SLE-Module-Public-Cloud-12-2018-845=1

Package List:

– SUSE OpenStack Cloud 6 (x86_64):

kernel-default-3.12.74-60.64.88.1
kernel-default-base-3.12.74-60.64.88.1
kernel-default-base-debuginfo-3.12.74-60.64.88.1
kernel-default-debuginfo-3.12.74-60.64.88.1
kernel-default-debugsource-3.12.74-60.64.88.1
kernel-default-devel-3.12.74-60.64.88.1
kernel-syms-3.12.74-60.64.88.1
kernel-xen-3.12.74-60.64.88.1
kernel-xen-base-3.12.74-60.64.88.1
kernel-xen-base-debuginfo-3.12.74-60.64.88.1
kernel-xen-debuginfo-3.12.74-60.64.88.1
kernel-xen-debugsource-3.12.74-60.64.88.1
kernel-xen-devel-3.12.74-60.64.88.1
kgraft-patch-3_12_74-60_64_88-default-1-2.3.1
kgraft-patch-3_12_74-60_64_88-xen-1-2.3.1

– SUSE OpenStack Cloud 6 (noarch):

kernel-devel-3.12.74-60.64.88.1
kernel-macros-3.12.74-60.64.88.1
kernel-source-3.12.74-60.64.88.1

– SUSE Linux Enterprise Server for SAP 12-SP1 (ppc64le x86_64):

kernel-default-3.12.74-60.64.88.1
kernel-default-base-3.12.74-60.64.88.1
kernel-default-base-debuginfo-3.12.74-60.64.88.1
kernel-default-debuginfo-3.12.74-60.64.88.1
kernel-default-debugsource-3.12.74-60.64.88.1
kernel-default-devel-3.12.74-60.64.88.1
kernel-syms-3.12.74-60.64.88.1

– SUSE Linux Enterprise Server for SAP 12-SP1 (noarch):

kernel-devel-3.12.74-60.64.88.1
kernel-macros-3.12.74-60.64.88.1
kernel-source-3.12.74-60.64.88.1

– SUSE Linux Enterprise Server for SAP 12-SP1 (x86_64):

kernel-xen-3.12.74-60.64.88.1
kernel-xen-base-3.12.74-60.64.88.1
kernel-xen-base-debuginfo-3.12.74-60.64.88.1
kernel-xen-debuginfo-3.12.74-60.64.88.1
kernel-xen-debugsource-3.12.74-60.64.88.1
kernel-xen-devel-3.12.74-60.64.88.1
kgraft-patch-3_12_74-60_64_88-default-1-2.3.1
kgraft-patch-3_12_74-60_64_88-xen-1-2.3.1

– SUSE Linux Enterprise Server 12-SP1-LTSS (ppc64le s390x x86_64):

kernel-default-3.12.74-60.64.88.1
kernel-default-base-3.12.74-60.64.88.1
kernel-default-base-debuginfo-3.12.74-60.64.88.1
kernel-default-debuginfo-3.12.74-60.64.88.1
kernel-default-debugsource-3.12.74-60.64.88.1
kernel-default-devel-3.12.74-60.64.88.1
kernel-syms-3.12.74-60.64.88.1

– SUSE Linux Enterprise Server 12-SP1-LTSS (x86_64):

kernel-xen-3.12.74-60.64.88.1
kernel-xen-base-3.12.74-60.64.88.1
kernel-xen-base-debuginfo-3.12.74-60.64.88.1
kernel-xen-debuginfo-3.12.74-60.64.88.1
kernel-xen-debugsource-3.12.74-60.64.88.1
kernel-xen-devel-3.12.74-60.64.88.1
kgraft-patch-3_12_74-60_64_88-default-1-2.3.1
kgraft-patch-3_12_74-60_64_88-xen-1-2.3.1

– SUSE Linux Enterprise Server 12-SP1-LTSS (noarch):

kernel-devel-3.12.74-60.64.88.1
kernel-macros-3.12.74-60.64.88.1
kernel-source-3.12.74-60.64.88.1

– SUSE Linux Enterprise Server 12-SP1-LTSS (s390x):

kernel-default-man-3.12.74-60.64.88.1

– SUSE Linux Enterprise Module for Public Cloud 12 (x86_64):

kernel-ec2-3.12.74-60.64.88.1
kernel-ec2-debuginfo-3.12.74-60.64.88.1
kernel-ec2-debugsource-3.12.74-60.64.88.1
kernel-ec2-devel-3.12.74-60.64.88.1
kernel-ec2-extra-3.12.74-60.64.88.1
kernel-ec2-extra-debuginfo-3.12.74-60.64.88.1

References:

https://www.suse.com/security/cve/CVE-2017-0861.html
https://www.suse.com/security/cve/CVE-2017-11089.html
https://www.suse.com/security/cve/CVE-2017-13220.html
https://www.suse.com/security/cve/CVE-2017-18203.html
https://www.suse.com/security/cve/CVE-2018-10087.html
https://www.suse.com/security/cve/CVE-2018-10124.html
https://www.suse.com/security/cve/CVE-2018-1087.html
https://www.suse.com/security/cve/CVE-2018-7757.html
https://www.suse.com/security/cve/CVE-2018-8781.html
https://www.suse.com/security/cve/CVE-2018-8822.html
https://www.suse.com/security/cve/CVE-2018-8897.html
https://bugzilla.suse.com/1076537
https://bugzilla.suse.com/1082299
https://bugzilla.suse.com/1083125
https://bugzilla.suse.com/1083242
https://bugzilla.suse.com/1083275
https://bugzilla.suse.com/1084536
https://bugzilla.suse.com/1085279
https://bugzilla.suse.com/1085331
https://bugzilla.suse.com/1086162
https://bugzilla.suse.com/1086194
https://bugzilla.suse.com/1087088
https://bugzilla.suse.com/1087260
https://bugzilla.suse.com/1088147
https://bugzilla.suse.com/1088260
https://bugzilla.suse.com/1088261
https://bugzilla.suse.com/1089608
https://bugzilla.suse.com/1089752
https://bugzilla.suse.com/1090643

—
To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org

SUSE Security Update: Security update for the Linux Kernel
______________________________________________________________________________

Announcement ID: SUSE-SU-2018:1217-1
Rating: important
References: #1005778 #1005780 #1005781 #1012382 #1015336
#1015337 #1015340 #1015342 #1015343 #1019695
#1019699 #1022604 #1022743 #1024296 #1031717
#1046610 #1060799 #1064206 #1068032 #1073059
#1073069 #1075091 #1075428 #1075994 #1076033
#1077560 #1083125 #1083574 #1083745 #1083836
#1084223 #1084310 #1084328 #1084353 #1084452
#1084610 #1084699 #1084721 #1084829 #1084889
#1084898 #1084914 #1084918 #1084967 #1085042
#1085058 #1085185 #1085224 #1085383 #1085402
#1085404 #1085487 #1085507 #1085511 #1085679
#1085958 #1085981 #1086015 #1086162 #1086194
#1086357 #1086499 #1086518 #1086607 #1087088
#1087211 #1087231 #1087260 #1087274 #1087659
#1087845 #1087906 #1087999 #1088050 #1088087
#1088242 #1088267 #1088313 #1088324 #1088600
#1088684 #1088865 #1088871 #1089198 #1089608
#1089644 #1089752 #1089925 #802154 #810912
#812592 #813453 #880131 #966170 #966172 #966186
#966191 #969476 #969477 #981348
Cross-References: CVE-2017-18257 CVE-2018-10087 CVE-2018-10124
CVE-2018-1091 CVE-2018-7740 CVE-2018-8043
CVE-2018-8822
Affected Products:
SUSE Linux Enterprise Real Time Extension 12-SP3
______________________________________________________________________________

An update that solves 7 vulnerabilities and has 93 fixes is
now available.

Description:

The SUSE Linux Enterprise 12 SP3 RT kernel was updated to 4.4.128 to
receive various security and bugfixes.

The following security bugs were fixed:

– CVE-2018-10124: The kill_something_info function in kernel/signal.c
might have allowed local users to cause a denial of service via an
INT_MIN argument (bnc#1089752).
– CVE-2018-10087: The kernel_wait4 function in kernel/exit.c might have
allowed local users to cause a denial of service by triggering an
attempted use of the
-INT_MIN value (bnc#1089608).
– CVE-2017-18257: The __get_data_block function in fs/f2fs/data.c allowed
local users to cause a denial of service (integer overflow and loop) via
crafted use
of the open and fallocate system calls with an FS_IOC_FIEMAP ioctl
(bnc#1088241)
– CVE-2018-1091: In the flush_tmregs_to_thread function in
arch/powerpc/kernel/ptrace.c, a guest kernel crash can be triggered from
unprivileged userspace during a core dump on a POWER host due to a
missing processor feature check and an erroneous use of transactional
memory (TM) instructions in the core dump path, leading to a denial of
service (bnc#1087231).
– CVE-2018-8822: Incorrect buffer length handling in the ncp_read_kernel
function could have been exploited by malicious NCPFS servers to crash
the kernel or execute code (bnc#1086162).
– CVE-2018-8043: The unimac_mdio_probe function in
drivers/net/phy/mdio-bcm-unimac.c did not validate certain resource
availability, which allowed local users to cause a denial of service
(NULL pointer dereference) (bnc#1084829).
– CVE-2018-7740: The resv_map_release function in mm/hugetlb.c allowed
local users to cause a denial of service (BUG) via a crafted application
that made mmap system calls and has a large pgoff argument to the
remap_file_pages system call (bnc#1084353).

The following non-security bugs were fixed:

– Fix ltp might_sleep() splat BUG
– ACPI / PMIC: xpower: Fix power_table addresses (bnc#1012382).
– ACPI, PCI, irq: remove redundant check for null string pointer
(bnc#1012382).
– ACPI/IORT: numa: Add numa node mapping for smmuv3 devices (bsc#1085981).
– ACPI/processor: Fix error handling in __acpi_processor_start()
(bnc#1012382).
– ACPI/processor: Replace racy task affinity logic (bnc#1012382).
– ACPICA: Add header support for TPM2 table changes (bsc#1084452).
– ACPICA: Add support for new SRAT subtable (bsc#1085981).
– ACPICA: Disassembler: Abort on an invalid/unknown AML opcode
(bnc#1012382).
– ACPICA: Events: Add runtime stub support for event APIs (bnc#1012382).
– ACPICA: iasl: Update to IORT SMMUv3 disassembling (bsc#1085981).
– ALSA: aloop: Fix access to not-yet-ready substream via cable
(bnc#1012382).
– ALSA: aloop: Sync stale timer before release (bnc#1012382).
– ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
(bnc#1012382).
– ALSA: hda – Revert power_save option default value (git-fixes).
– ALSA: hda/realtek – Always immediately update mute LED with pin VREF
(bnc#1012382).
– ALSA: hda/realtek – Fix dock line-out volume on Dell Precision 7520
(bnc#1012382).
– ALSA: hda/realtek – Fix speaker no sound after system resume
(bsc#1031717).
– ALSA: hda: Add a power_save blacklist (bnc#1012382).
– ALSA: hda: add dock and led support for HP EliteBook 820 G3
(bnc#1012382).
– ALSA: hda: add dock and led support for HP ProBook 640 G2 (bnc#1012382).
– ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats() (bnc#1012382).
– ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
(bnc#1012382).
– ALSA: pcm: potential uninitialized return values (bnc#1012382).
– ALSA: usb-audio: Add a quirck for BW PX headphones (bnc#1012382).
– ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
(bnc#1012382).
– ARM64 / cpuidle: Use new cpuidle macro for entering retention state
(bsc#1084328).
– ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and
!FRAME_POINTER (bnc#1012382).
– ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to
SW_WKUP (bnc#1012382).
– ARM: davinci: da8xx: Create DSP device only when assigned memory
(bnc#1012382).
– ARM: dts: Adjust moxart IRQ controller and flags (bnc#1012382).
– ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux (bnc#1012382).
– ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux (bnc#1012382).
– ARM: dts: am335x-pepper: Fix the audio CODEC’s reset pin (bnc#1012382).
– ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property
(bnc#1012382).
– ARM: dts: dra7: Add power hold and power controller properties to palmas
(bnc#1012382).
– ARM: dts: exynos: Correct Trats2 panel reset line (bnc#1012382).
– ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin (bnc#1012382).
– ARM: dts: imx6qdl-wandboard: Fix audio channel swap (bnc#1012382).
– ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
(bnc#1012382).
– ARM: dts: ls1021a: add “fsl,ls1021a-esdhc” compatible string to esdhc
node (bnc#1012382).
– ARM: dts: omap3-n900: Fix the audio CODEC’s reset pin (bnc#1012382).
– ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks (bnc#1012382).
– ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks (bnc#1012382).
– ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull (bnc#1012382).
– ARM: mvebu: Fix broken PL310_ERRATA_753970 selects (bnc#1012382).
– ASoC: Intel: cht_bsw_rt5645: Analog Mic support (bnc#1012382).
– ASoC: rcar: ssi: do not set SSICR.CKDV = 000 with SSIWSR.CONT
(bnc#1012382).
– ASoC: rsnd: SSI PIO adjust to 24bit mode (bnc#1012382).
– Bluetooth: Fix missing encryption refresh on Security Request
(bnc#1012382).
– Bluetooth: Send HCI Set Event Mask Page 2 command only when needed
(bnc#1012382).
– Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174 (bnc#1012382).
– Bluetooth: hci_qca: Avoid setup failure on missing rampatch
(bnc#1012382).
– Btrfs: incremental send, fix invalid memory access (git-fixes).
– Btrfs: send, fix file hole not being preserved due to inline extent
(bnc#1012382).
– CIFS: silence lockdep splat in cifs_relock_file() (bnc#1012382).
– Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override
property definition (bnc#1012382).
– EDAC, mv64x60: Fix an error handling path (bnc#1012382).
– EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL
(git-fixes 3286d3eb906c).
– HID: clamp input to logical range if no null state (bnc#1012382).
– HID: reject input outside logical range only if null state is set
(bnc#1012382).
– IB/core: Fix possible crash to access NULL netdev (bsc#966191
bsc#966186).
– IB/core: Generate GID change event regardless of RoCE GID table property
(bsc#966191 bsc#966186).
– IB/ipoib: Avoid memory leak if the SA returns a different DGID
(bnc#1012382).
– IB/ipoib: Update broadcast object if PKey value was changed in index 0
(bnc#1012382).
– IB/mlx4: Change vma from shared to private (bnc#1012382).
– IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs (bsc#966191 bsc#966186).
– IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
(bsc#966191 bsc#966186).
– IB/mlx4: Take write semaphore when changing the vma struct (bnc#1012382).
– IB/mlx5: Avoid passing an invalid QP type to firmware (bsc#1015342
bsc#1015343).
– IB/mlx5: Fix an error code in __mlx5_ib_modify_qp() (bsc#966170
bsc#966172).
– IB/mlx5: Fix incorrect size of klms in the memory region (bsc#966170
bsc#966172).
– IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq (bsc#966170
bsc#966172).
– IB/mlx5: Set the default active rate and width to QDR and 4X
(bsc#1015342 bsc#1015343).
– IB/mlx5: revisit -Wmaybe-uninitialized warning (bsc#1015342 bsc#1015343).
– IB/srpt: Fix abort handling (bnc#1012382).
– IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()
(bnc#1024296).
– IB/umem: Fix use of npages/nmap fields (bnc#1012382).
– Input: elan_i2c – check if device is there before really probing
(bnc#1012382).
– Input: elan_i2c – clear INT before resetting controller (bnc#1012382).
– Input: elantech – force relative mode on a certain module (bnc#1012382).
– Input: i8042 – add Lenovo ThinkPad L460 to i8042 reset list
(bnc#1012382).
– Input: i8042 – enable MUX on Sony VAIO VGN-CS series to fix touchpad
(bnc#1012382).
– Input: matrix_keypad – fix race when disabling interrupts (bnc#1012382).
– Input: mousedev – fix implicit conversion warning (bnc#1012382).
– Input: qt1070 – add OF device ID table (bnc#1012382).
– Input: tsc2007 – check for presence and power down tsc2007 during probe
(bnc#1012382).
– KVM: PPC: Book3S PR: Check copy_to/from_user return values (bnc#1012382).
– KVM: PPC: Book3S PR: Exit KVM on failed mapping (bnc#1012382).
– KVM: SVM: do not zero out segment attributes if segment is unusable or
not present (bnc#1012382).
– KVM: arm/arm64: Handle CPU_PM_ENTER_FAILED (bsc#1086499).
– KVM: arm/arm64: vgic-its: Check result of allocation before use (bsc#).
– KVM: arm/arm64: vgic-its: Preserve the revious read from the pending
table (bsc#1086499).
– KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending
(bsc#1086499).
– KVM: arm/arm64: vgic: Do not populate multiple LRs with the same vintid
(bsc#1086499).
– KVM: mmu: Fix overlap between public and private memslots (bnc#1012382).
– KVM: nVMX: Fix handling of lmsw instruction (bnc#1012382).
– Kbuild: provide a __UNIQUE_ID for clang (bnc#1012382).
– MIPS: BMIPS: Do not mask IPIs during suspend (bnc#1012382).
– MIPS: BPF: Fix multiple problems in JIT skb access helpers (bnc#1012382).
– MIPS: BPF: Quit clobbering callee saved registers in JIT code
(bnc#1012382).
– MIPS: OCTEON: irq: Check for null return on kzalloc allocation
(bnc#1012382).
– MIPS: ath25: Check for kzalloc allocation failure (bnc#1012382).
– MIPS: kprobes: flush_insn_slot should flush only if probe initialised
(bnc#1012382).
– MIPS: mm: adjust PKMAP location (bnc#1012382).
– MIPS: mm: fixed mappings: correct initialisation (bnc#1012382).
– MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
(bnc#1012382).
– MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification (bnc#1012382).
– MIPS: ralink: Remove ralink_halt() (bnc#1012382).
– NFC: nfcmrvl: Include unaligned.h instead of access_ok.h (bnc#1012382).
– NFC: nfcmrvl: double free on error path (bnc#1012382).
– NFS: Fix an incorrect type in struct nfs_direct_req (bnc#1012382).
– NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
(bnc#1012382).
– NFSv4.1: Work around a Linux server bug.. (bnc#1012382).
– PCI/ACPI: Fix bus range comparison in pci_mcfg_lookup() (bsc#1084699).
– PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown() (bnc#1012382).
– PCI/cxgb4: Extend T3 PCI quirk to T4+ devices (bsc#981348).
– PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
(bnc#1012382).
– PCI: Add pci_reset_function_locked() (bsc#1084889).
– PCI: Apply Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(bsc#1084914).
– PCI: Avoid FLR for Intel 82579 NICs (bsc#1084889).
– PCI: Avoid slot reset if bridge itself is broken (bsc#1084918).
– PCI: Export pcie_flr() (bsc#1084889).
– PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant (bnc#1012382).
– PCI: Mark Haswell Power Control Unit as having non-compliant BARs
(bsc#1086015).
– PCI: Probe for device reset support during enumeration (bsc#1084889).
– PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()
(bsc#1084889).
– PCI: Protect restore with device lock to be consistent (bsc#1084889).
– PCI: Remove __pci_dev_reset() and pci_dev_reset() (bsc#1084889).
– PCI: Remove redundant probes for device reset support (bsc#1084889).
– PCI: Wait for up to 1000ms after FLR reset (bsc#1084889).
– PCI: hv: Fix 2 hang issues in hv_compose_msi_msg() (bsc#1087659,
bsc#1087906).
– PCI: hv: Fix a comment typo in _hv_pcifront_read_config() (bsc#1087659).
– PCI: hv: Only queue new work items in hv_pci_devices_present() if
necessary (bsc#1087659).
– PCI: hv: Remove the bogus test in hv_eject_device_work() (bsc#1087659).
– PCI: hv: Serialize the present and eject work items (bsc#1087659).
– Partial revert “e1000e: Avoid receiver overrun interrupt bursts”
(bsc#1075428).
– RDMA/cma: Use correct size when writing netlink stats (bnc#1012382).
– RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack
access
– RDMA/core: Do not use invalid destination in determining port reuse
– RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()
(bnc#1012382).
– RDMA/mlx5: Fix integer overflow while resizing CQ (bnc#1012382).
– RDMA/mlx5: Protect from NULL pointer derefence (bsc#1015342 bsc#1015343).
– RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS (bnc#1012382).
– RDMA/qedr: Fix QP state initialization race (bsc#1022604).
– RDMA/qedr: Fix rc initialization on CNQ allocation failure (bsc#1022604).
– RDMA/qedr: fix QP’s ack timeout configuration (bsc#1022604).
– RDMA/rxe: Fix an out-of-bounds read
– RDMA/ucma: Check AF family prior resolving address (bnc#1012382).
– RDMA/ucma: Check that device exists prior to accessing it (bnc#1012382).
– RDMA/ucma: Check that device is connected prior to access it
(bnc#1012382).
– RDMA/ucma: Check that user does not overflow QP state (bnc#1012382).
– RDMA/ucma: Do not allow join attempts for unsupported AF family
(bnc#1012382).
– RDMA/ucma: Ensure that CM_ID exists prior to access it (bnc#1012382).
– RDMA/ucma: Fix access to non-initialized CM_ID object (bnc#1012382).
– RDMA/ucma: Fix use-after-free access in ucma_close (bnc#1012382).
– RDMA/ucma: Introduce safer rdma_addr_size() variants (bnc#1012382).
– RDMA/ucma: Limit possible option size (bnc#1012382).
– Revert “ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux” (bnc#1012382).
– Revert “ARM: dts: am335x-pepper: Fix the audio CODEC’s reset pin”
(bnc#1012382).
– Revert “ARM: dts: omap3-n900: Fix the audio CODEC’s reset pin”
(bnc#1012382).
– Revert “PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()”
(bnc#1012382).
– Revert “cpufreq: Fix governor module removal race” (bnc#1012382).
– Revert “e1000e: Separate signaling for link check/link up” (bsc#1075428).
– Revert “genirq: Use irqd_get_trigger_type to compare the trigger type
for shared IRQs” (bnc#1012382).
– Revert “ip6_vti: adjust vti mtu according to mtu of lower device”
(bnc#1012382).
– Revert “ipvlan: add L2 check for packets arriving via virtual devices”
(reverted in upstream).
– Revert “led: core: Fix brightness setting when setting delay_off=0”
(bnc#1012382).
– Revert “mtip32xx: use runtime tag to initialize command header”
(bnc#1012382).
– Revert “xhci: plat: Register shutdown for xhci_plat” (bnc#1012382).
– Subject: af_iucv: enable control sends in case of SEND_SHUTDOWN
(bnc#1085507, LTC#165135).
– USB: ene_usb6250: fix SCSI residue overwriting (bnc#1012382).
– USB: ene_usb6250: fix first command execution (bnc#1012382).
– USB: gadget: udc: Add missing platform_device_put() on error in
bdc_pci_probe() (bnc#1012382).
– USB: serial: cp210x: add ELDAT Easywave RX09 id (bnc#1012382).
– USB: serial: ftdi_sio: add RT Systems VX-8 cable (bnc#1012382).
– USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
(bnc#1012382).
– USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
(bnc#1012382).
– USB: usbmon: remove assignment from IS_ERR argument (bnc#1012382).
– Update
patches.arch/s390-sles12sp3-08-03-KVM-s390-instruction-execution-protection
-support.patch (LTC#162428, bsc#1073069).
– Update
patches.arch/s390-sles12sp3-08-06-01-s390-mem_detect-use-unsigned-longs.pat
ch (LTC#158956, bsc#1073059).
– Update
patches.arch/s390-sles12sp3-08-06-02-kvm-s390-enable-all-facility-bits-that
-are-known-goo.patch (LTC#158956, bsc#1073059).
– Update
patches.arch/s390-sles12sp3-08-06-03-s390-sclp-add-hmfai-field.patch
(LTC#158956, bsc#1073059).
– Update
patches.arch/s390-sles12sp3-08-06-04-kvm-s390-populate-mask-of-non-hypervis
or-managed-fac.patch (LTC#158956, bsc#1073059).
– Update patches.suse/x86-nospectre_v2-means-nospec-too.patch (bsc#1075994
bsc#1075091 bnc#1085958).
– acpi, numa: fix pxm to online numa node associations (bnc#1012382).
– agp/intel: Flush all chipset writes after updating the GGTT
(bnc#1012382).
– ahci: Add PCI-id for the Highpoint Rocketraid 644L card (bnc#1012382).
– apparmor: Make path_max parameter readonly (bnc#1012382).
– arm/arm64: KVM: Add PSCI_VERSION helper (bsc#1068032).
– arm/arm64: KVM: Add smccc accessors to PSCI code (bsc#1068032).
– arm/arm64: KVM: Advertise SMCCC v1.1 (bsc#1068032).
– arm/arm64: KVM: Consolidate the PSCI include files (bsc#1068032).
– arm/arm64: KVM: Implement PSCI 1.0 support (bsc#1068032).
– arm/arm64: KVM: Turn kvm_psci_version into a static inline (bsc#1068032).
– arm/arm64: smccc: Implement SMCCC v1.1 inline primitive (bsc#1068032).
– arm/arm64: smccc: Make function identifiers an unsigned quantity
(bsc#1068032).
– arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support
(bsc#1068032).
– arm64: Add missing Falkor part number for branch predictor hardening
(bsc#1068032).
– arm64: Enforce BBM for huge IO/VMAP mappings (bsc#1088313).
– arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling (bsc#1068032).
– arm64: KVM: Increment PC after handling an SMC trap (bsc#1068032).
– arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support
(bsc#1068032).
– arm64: Kill PSCI_GET_VERSION as a variant-2 workaround (bsc#1068032).
– arm64: Relax ARM_SMCCC_ARCH_WORKAROUND_1 discovery (bsc#1068032).
– arm64: avoid overflow in VA_START and PAGE_OFFSET (bnc#1012382).
– arm64: capabilities: Handle duplicate entries for a capability
(bsc#1068032).
– arm64: cpufeature: __this_cpu_has_cap() shouldn’t stop early
(bsc#1068032).
– arm64: fix smccc compilation (bsc#1068032).
– arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage
(bnc#1012382).
– arm64: mm: do not write garbage into TTBR1_EL1 register (bsc#1085487).
– arm64: mm: fix thinko in non-global page table attribute check
(bsc#1088050).
– arp: fix arp_filter on l3slave devices (bnc#1012382).
– arp: honour gratuitous ARP _replies_ (bnc#1012382).
– async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
(bnc#1012382).
– ata: libahci: properly propagate return value of platform_get_irq()
(bnc#1012382).
– ath10k: disallow DFS simulation if DFS channel is not enabled
(bnc#1012382).
– ath10k: fix invalid STS_CAP_OFFSET_MASK (bnc#1012382).
– ath10k: update tdls teardown state to target (bnc#1012382).
– ath5k: fix memory leak on buf on failed eeprom read (bnc#1012382).
– ath: Fix updating radar flags for coutry code India (bnc#1012382).
– audit: add tty field to LOGIN event (bnc#1012382).
– batman-adv: handle race condition for claims between gateways
(bnc#1012382).
– bcache: do not attach backing with duplicate UUID (bnc#1012382).
– bcache: segregate flash only volume write streams (bnc#1012382).
– bcache: stop writeback thread after detaching (bnc#1012382).
– blk-mq: fix bad clear of RQF_MQ_INFLIGHT in blk_mq_ct_ctx_init()
(bsc#1085058).
– blk-mq: fix kernel oops in blk_mq_tag_idle() (bnc#1012382).
– blk-throttle: make sure expire time isn’t too big (bnc#1012382).
– blkcg: fix double free of new_blkg in blkcg_init_queue (bnc#1012382).
– block-mq: stop workqueue items in blk_mq_stop_hw_queue() (bsc#1084967).
– block: correctly mask out flags in blk_rq_append_bio() (bsc#1085058).
– block: do not assign cmd_flags in __blk_rq_prep_clone (bsc#1088087).
– bna: Avoid reading past end of buffer (bnc#1012382).
– bnx2x: Align RX buffers (bnc#1012382).
– bnx2x: Allow vfs to disable txvlan offload (bnc#1012382).
– bonding: Do not update slave->link until ready to commit (bnc#1012382).
– bonding: fix the err path for dev hwaddr sync in bond_enslave
(bnc#1012382).
– bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave
(bnc#1012382).
– bonding: process the err returned by dev_set_allmulti properly in
bond_enslave (bnc#1012382).
– bonding: refine bond_fold_stats() wrap detection (bnc#1012382).
– bpf, x64: implement retpoline for tail call (bnc#1012382).
– bpf, x64: increase number of passes (bnc#1012382).
– bpf: fix incorrect sign extension in check_alu_op() (bnc#1012382).
– bpf: skip unnecessary capability check (bnc#1012382).
– braille-console: Fix value returned by _braille_console_setup
(bnc#1012382).
– brcmfmac: fix P2P_DEVICE ethernet address generation (bnc#1012382).
– bridge: check brport attr show in brport_show (bnc#1012382).
– btrfs: Fix use-after-free when cleaning up fs_devs with a single stale
device (bnc#1012382).
– btrfs: Only check first key for committed tree blocks (bsc#1084721).
– btrfs: Validate child tree block’s level and first key (bsc#1084721).
– btrfs: alloc_chunk: fix DUP stripe size handling (bnc#1012382).
– btrfs: fix incorrect error return ret being passed to mapping_set_error
(bnc#1012382).
– btrfs: improve delayed refs iterations (bsc#1076033).
– btrfs: preserve i_mode if __btrfs_set_acl() fails (bnc#1012382).
– bus: brcmstb_gisb: Use register offsets with writes too (bnc#1012382).
– bus: brcmstb_gisb: correct support for 64-bit address output
(bnc#1012382).
– can: cc770: Fix queue stall and dropped RTR reply (bnc#1012382).
– can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack
(bnc#1012382).
– can: cc770: Fix use after free in cc770_tx_interrupt() (bnc#1012382).
– ceph: only dirty ITER_IOVEC pages for direct read (bsc#1084898).
– cfg80211: make RATE_INFO_BW_20 the default (bnc#1012382).
– ch9200: use skb_cow_head() to deal with cloned skbs (bsc#1088684).
– clk: Fix __set_clk_rates error print-string (bnc#1012382).
– clk: bcm2835: Protect sections updating shared registers (bnc#1012382).
– clk: ns2: Correct SDIO bits (bnc#1012382).
– clk: qcom: msm8916: fix mnd_width for codec_digcodec (bnc#1012382).
– clk: scpi: fix return type of __scpi_dvfs_round_rate (bnc#1012382).
– clk: si5351: Rename internal plls to avoid name collisions (bnc#1012382).
– coresight: Fix disabling of CoreSight TPIU (bnc#1012382).
– coresight: Fixes coresight DT parse to get correct output port ID
(bnc#1012382).
– cpufreq/sh: Replace racy task affinity logic (bnc#1012382).
– cpufreq: Fix governor module removal race (bnc#1012382).
– cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() (bnc#1012382).
– cpuidle: Add new macro to enter a retention idle state (bsc#1084328).
– cpumask: Add helper cpumask_available() (bnc#1012382).
– cros_ec: fix nul-termination for firmware build info (bnc#1012382).
– crypto: ahash – Fix early termination in hash walk (bnc#1012382).
– crypto: cavium – fix memory leak on info (bsc#1086518).
– crypto: x86/cast5-avx – fix ECB encryption when long sg follows short
one (bnc#1012382).
– cx25840: fix unchecked return values (bnc#1012382).
– cxgb4: FW upgrade fixes (bnc#1012382).
– cxgb4: Fix queue free path of ULD drivers (bsc#1022743).
– cxgb4: fix incorrect cim_la output for T6 (bnc#1012382).
– cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages
(bnc#1012382).
– dcache: Add cond_resched in shrink_dentry_list (bsc#1086194).
– dccp: check sk for closed state in dccp_sendmsg() (bnc#1012382).
– dm ioctl: remove double parentheses (bnc#1012382).
– dm: Always copy cmd_flags when cloning a request (bsc#1088087).
– dmaengine: imx-sdma: Handle return value of clk_prepare_enable
(bnc#1012382).
– dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
(bnc#1012382).
– dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
(bnc#1012382).
– driver: (adm1275) set the m,b and R coefficients correctly for power
(bnc#1012382).
– drivers/infiniband/core/verbs.c: fix build with gcc-4.4.4
– drivers/infiniband/ulp/srpt/ib_srpt.c: fix build with gcc-4.4.4
(bnc#1024296).
– drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow
tests (bnc#1012382).
– drm/amdgpu/dce: Do not turn off DP sink when disconnected (bnc#1012382).
– drm/amdgpu: Fail fb creation from imported dma-bufs. (v2) (bnc#1012382).
– drm/amdgpu: Fix deadlock on runtime suspend (bnc#1012382).
– drm/amdgpu: Notify sbios device ready before send request (bnc#1012382).
– drm/amdgpu: fix KV harvesting (bnc#1012382).
– drm/amdkfd: Fix memory leaks in kfd topology (bnc#1012382).
– drm/edid: set ELD connector type in drm_edid_to_eld() (bnc#1012382).
– drm/i915/cmdparser: Do not check past the cmd length (bsc#1031717).
– drm/i915/psr: Check for the specific AUX_FRAME_SYNC cap bit
(bsc#1031717).
– drm/msm: fix leak in failed get_pages (bnc#1012382).
– drm/nouveau/kms: Increase max retries in scanout position queries
(bnc#1012382).
– drm/nouveau: Fix deadlock on runtime suspend (bnc#1012382).
– drm/omap: DMM: Check for DMM readiness after successful transaction
commit (bnc#1012382).
– drm/omap: fix tiled buffer stride calculations (bnc#1012382).
– drm/radeon: Do not turn off DP sink when disconnected (bnc#1012382).
– drm/radeon: Fail fb creation from imported dma-bufs (bnc#1012382).
– drm/radeon: Fix deadlock on runtime suspend (bnc#1012382).
– drm/radeon: fix KV harvesting (bnc#1012382).
– drm/vmwgfx: Fix a destoy-while-held mutex problem (bnc#1012382).
– drm/vmwgfx: Fixes to vmwgfx_fb (bnc#1012382).
– drm: Allow determining if current task is output poll worker
(bnc#1012382).
– drm: Defer disabling the vblank IRQ until the next interrupt (for
instant-off) (bnc#1012382).
– drm: qxl: Do not alloc fbdev if emulation is not supported (bnc#1012382).
– drm: udl: Properly check framebuffer mmap offsets (bnc#1012382).
– e1000e: Avoid missed interrupts following ICR read (bsc#1075428).
– e1000e: Avoid receiver overrun interrupt bursts (bsc#1075428).
– e1000e: Fix check_for_link return value with autoneg off (bsc#1075428).
– e1000e: Fix link check race condition (bsc#1075428).
– e1000e: Fix queue interrupt re-raising in Other interrupt (bsc#1075428).
– e1000e: Remove Other from EIAC (bsc#1075428).
– e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails (bnc#1012382).
– e1000e: fix race condition around skb_tstamp_tx() (bnc#1012382).
– e1000e: fix timing for 82579 Gigabit Ethernet controller (bnc#1012382).
– esp: Fix memleaks on error paths (git-fixes).
– ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
(bnc#1012382).
– ext4: inplace xattr block update fails to deduplicate blocks
(bnc#1012382).
– f2fs: relax node version check for victim data in gc (bnc#1012382).
– fib_semantics: Do not match route with mismatching tclassid
(bnc#1012382).
– firmware/psci: Expose PSCI conduit (bsc#1068032).
– firmware/psci: Expose SMCCC version through psci_ops (bsc#1068032).
– fix race in drivers/char/random.c:get_reg() (bnc#1012382).
– fixup: sctp: verify size of a new chunk in _sctp_make_chunk()
(bnc#1012382).
– frv: declare jiffies to be located in the .data section (bnc#1012382).
– fs/aio: Add explicit RCU grace period when freeing kioctx (bnc#1012382).
– fs/aio: Use RCU accessors for kioctx_table->table[] (bnc#1012382).
– fs/hugetlbfs/inode.c: change put_page/unlock_page order in
hugetlbfs_fallocate() (git-fixes, bsc#1083745).
– fs/proc: Stop trying to report thread stacks (bnc#1012382).
– fs: Teach path_connected to handle nfs filesystems with multiple roots
(bnc#1012382).
– fs: compat: Remove warning from COMPATIBLE_IOCTL (bnc#1012382).
– genirq: Track whether the trigger type has been set (git-fixes).
– genirq: Use cpumask_available() for check of cpumask variable
(bnc#1012382).
– genirq: Use irqd_get_trigger_type to compare the trigger type for shared
IRQs (bnc#1012382).
– gpio: label descriptors using the device name (bnc#1012382).
– hdlc_ppp: carrier detect ok, do not turn off negotiation (bnc#1012382).
– hdlcdrv: Fix divide by zero in hdlcdrv_ioctl (bnc#1012382).
– hugetlbfs: fix offset overflow in hugetlbfs mmap (bnc#1084353).
– hv_balloon: fix bugs in num_pages_onlined accounting
– hv_balloon: fix printk loglevel
– hv_balloon: simplify hv_online_page()/hv_page_online_one()
– hwmon: (ina2xx) Fix access to uninitialized mutex (git-fixes).
– hwmon: (ina2xx) Make calibration register value fixed (bnc#1012382).
– i2c: i2c-scmi: add a MS HID (bnc#1012382).
– i2c: xlp9xx: Check for Bus state before every transfer (bsc#1084310).
– i2c: xlp9xx: Handle NACK on DATA properly (bsc#1084310).
– i2c: xlp9xx: Handle transactions with I2C_M_RECV_LEN properly
(bsc#1060799).
– i2c: xlp9xx: return ENXIO on slave address NACK (bsc#1060799).
– i40e: Acquire NVM lock before reads on all devices (bnc#1012382).
– i40iw: Free IEQ resources (bsc#969476 bsc#969477).
– ia64: fix module loading for gcc-5.4 (bnc#1012382).
– ibmvfc: Avoid unnecessary port relogin (bsc#1085404).
– ibmvnic: Clear pending interrupt after device reset (bsc#1089644).
– ibmvnic: Define vnic_login_client_data name field as unsized array
(bsc#1089198).
– ibmvnic: Disable irqs before exiting reset from closed state
(bsc#1084610).
– ibmvnic: Do not notify peers on parameter change resets (bsc#1089198).
– ibmvnic: Do not reset CRQ for Mobility driver resets (bsc#1088600).
– ibmvnic: Fix DMA mapping mistakes (bsc#1088600).
– ibmvnic: Fix failover case for non-redundant configuration (bsc#1088600).
– ibmvnic: Fix reset return from closed state (bsc#1084610).
– ibmvnic: Fix reset scheduler error handling (bsc#1088600).
– ibmvnic: Handle all login error conditions (bsc#1089198).
– ibmvnic: Potential NULL dereference in clean_one_tx_pool() (bsc#1085224,
git-fixes).
– ibmvnic: Remove unused TSO resources in TX pool structure (bsc#1085224).
– ibmvnic: Update TX pool cleaning routine (bsc#1085224).
– ibmvnic: Zero used TX descriptor counter on reset (bsc#1088600).
– ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
(bnc#1012382).
– iio: hi8435: avoid garbage event at first enable (bnc#1012382).
– iio: hi8435: cleanup reset gpio (bnc#1012382).
– iio: magnetometer: st_magn_spi: fix spi_device_id table (bnc#1012382).
– iio: st_pressure: st_accel: Initialise sensor platform data properly
(bnc#1012382).
– iio: st_pressure: st_accel: pass correct platform data to init
(git-fixes).
– ima: relax requiring a file signature for new files with zero length
(bnc#1012382).
– infiniband/uverbs: Fix integer overflows (bnc#1012382).
– iommu/omap: Register driver before setting IOMMU ops (bnc#1012382).
– iommu/vt-d: clean up pr_irq if request_threaded_irq fails (bnc#1012382).
– ip6_gre: better validate user provided tunnel names (bnc#1012382).
– ip6_tunnel: better validate user provided tunnel names (bnc#1012382).
– ip6_vti: adjust vti mtu according to mtu of lower device (bnc#1012382).
– ip_tunnel: better validate user provided tunnel names (bnc#1012382).
– ipmi/watchdog: fix wdog hang on panic waiting for ipmi response
(bnc#1012382).
– ipmi: Fix the I2C address extraction from SPMI tables (bsc#1060799).
– ipmi: Use the proper default value for register size in ACPI
(bsc#1060799).
– ipmi: do not probe ACPI devices if si_tryacpi is unset (bsc#1060799).
– ipmi:ssif: Use i2c_adapter_id instead of adapter->nr (bsc#1060799).
– ipmi_ssif: Fix kernel panic at msg_done_handler (bsc#1088871).
– ipmi_ssif: Fix logic around alert handling (bsc#1060799).
– ipmi_ssif: remove redundant null check on array client->adapter->name
(bsc#1060799).
– ipmi_ssif: unlock on allocation failure (bsc#1060799).
– ipsec: check return value of skb_to_sgvec always (bnc#1012382).
– ipv6 sit: work around bogus gcc-8 -Wrestrict warning (bnc#1012382).
– ipv6: avoid dad-failures for addresses with NODAD (bnc#1012382).
– ipv6: fix access to non-linear packet in
ndisc_fill_redirect_hdr_option() (bnc#1012382).
– ipv6: sit: better validate user provided tunnel names (bnc#1012382).
– ipv6: the entire IPv6 header chain must fit the first fragment
(bnc#1012382).
– ipvlan: add L2 check for packets arriving via virtual devices
(bnc#1012382).
– irqchip/gic-v3-its: Add ACPI NUMA node mapping (bsc#1085981).
– irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
(bsc#1085981).
– irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis (bnc#1012382).
– irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
(bsc#1085981).
– iw_cxgb4: print mapped ports correctly (bsc#321658 bsc#321660
bsc#321661).
– jiffies.h: declare jiffies and jiffies_64 with
____cacheline_aligned_in_smp (bnc#1012382).
– kABI: add tty include to audit.c (kabi).
– kABI: protect jiffies types (kabi).
– kABI: protect skb_to_sgvec* (kabi).
– kABI: protect tty include in audit.h (kabi).
– kGraft: fix small race in reversion code (bsc#1083125).
– kbuild: Handle builtin dtb file names containing hyphens (bnc#1012382).
– kbuild: disable clang’s default use of -fmerge-all-constants
(bnc#1012382).
– kprobes/x86: Fix kprobe-booster not to boost far call instructions
(bnc#1012382).
– kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
(git-fixes).
– kprobes/x86: Set kprobes pages read-only (bnc#1012382).
– kvm/x86: fix icebp instruction handling (bnc#1012382).
– kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on
v3 (bsc#1086499).
– kvm: nVMX: fix nested tsc scaling (bsc1087999).
– l2tp: do not accept arbitrary sockets (bnc#1012382).
– l2tp: fix missing print session offset info (bnc#1012382).
– leds: pca955x: Correct I2C Functionality (bnc#1012382).
– libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
(bnc#1012382).
– libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs (bnc#1012382).
– libata: Enable queued TRIM for Samsung SSD 860 (bnc#1012382).
– libata: Make Crucial BX100 500GB LPM quirk apply to all firmware
versions (bnc#1012382).
– libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
(bnc#1012382).
– libata: disable LPM for Crucial BX100 SSD 500GB drive (bnc#1012382).
– libata: fix length validation of ATAPI-relayed SCSI commands
(bnc#1012382).
– libata: remove WARN() for DMA or PIO command without data (bnc#1012382).
– llist: clang: introduce member_address_is_nonnull() (bnc#1012382).
– lock_parent() needs to recheck if dentry got __dentry_kill’ed under it
(bnc#1012382).
– lockd: fix lockd shutdown race (bnc#1012382).
– lockd: lost rollback of set_grace_period() in lockd_down_net()
(git-fixes).
– loop: Fix lost writes caused by missing flag (bnc#1012382).
– lpfc: update version to 11.4.0.7-1 (bsc#1085383).
– mISDN: Fix a sleep-in-atomic bug (bnc#1012382).
– mac80211: bail out from prep_connection() if a reconfig is ongoing
(bnc#1012382).
– mac80211: do not WARN on bad WMM parameters from buggy APs (bsc#1031717).
– mac80211: do not parse encrypted management frames in
ieee80211_frame_acked (bnc#1012382).
– mac80211: remove BUG() when interface type is invalid (bnc#1012382).
– mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
(bnc#1012382).
– mceusb: sporadic RX truncation corruption fix (bnc#1012382).
– md raid10: fix NULL deference in handle_write_completed() (git-fixes).
– md-cluster: fix wrong condition check in raid1_write_request
(bsc#1085402).
– md/raid10: reset the ‘first’ at the end of loop (bnc#1012382).
– md/raid10: skip spare disk as ‘first’ disk (bnc#1012382).
– md/raid10: wait up frozen array in handle_write_completed (bnc#1012382).
– md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock
(bnc#1012382).
– md/raid6: Fix anomily when recovering a single device in RAID6
(bnc#1012382).
– media/dvb-core: Race condition when writing to CAM (bnc#1012382).
– media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart
(bnc#1012382).
– media: au0828: fix VIDEO_V4L2 dependency (bsc#1031717).
– media: bt8xx: Fix err ‘bt878_probe()’ (bnc#1012382).
– media: c8sectpfe: fix potential NULL pointer dereference in
c8sectpfe_timer_interrupt (bnc#1012382).
– media: cpia2: Fix a couple off by one bugs (bnc#1012382).
– media: cx25821: prevent out-of-bounds read on array card (bsc#1031717).
– media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
(bnc#1012382).
– media: m88ds3103: do not call a non-initalized function (bnc#1012382).
– media: s3c-camif: fix out-of-bounds array access (bsc#1031717).
– media: videobuf2-core: do not go out of the buffer range (bnc#1012382).
– mei: remove dev_err message on an unsupported ioctl (bnc#1012382).
– mfd: palmas: Reset the POWERHOLD mux during power off (bnc#1012382).
– mlx5: fix bug reading rss_hash_type from CQE (bnc#1012382).
– mm/hugetlb.c: do not call region_abort if region_chg fails (bnc#1084353).
– mm/vmalloc: add interfaces to free unmapped page table (bnc#1012382).
– mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()
(bnc#1012382).
– mmc: avoid removing non-removable hosts during suspend (bnc#1012382).
– mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit
systems (bsc#1088267).
– mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
(bnc#1012382).
– mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a (bnc#1012382).
– mpls, nospec: Sanitize array index in mpls_label_ok() (bnc#1012382).
– mt7601u: check return value of alloc_skb (bnc#1012382).
– mtd: jedec_probe: Fix crash in jedec_read_mfr() (bnc#1012382).
– mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
(bnc#1012382).
– mtd: nand: fsl_ifc: Fix nand waitfunc return value (bnc#1012382).
– mtip32xx: use runtime tag to initialize command header (bnc#1012382).
– neighbour: update neigh timestamps iff update is effective (bnc#1012382).
– net sched actions: fix dumping which requires several messages to user
space (bnc#1012382).
– net/8021q: create device with all possible features in wanted_features
(bnc#1012382).
– net/faraday: Add missing include of of.h (bnc#1012382).
– net/ipv6: Fix route leaking between VRFs (bnc#1012382).
– net/ipv6: Increment OUTxxx counters after netfilter hook (bnc#1012382).
– net/iucv: Free memory obtained by kzalloc (bnc#1012382).
– net/mlx4: Check if Granular QoS per VF has been enabled before updating
QP qos_vport (bnc#1012382).
– net/mlx4: Fix the check in attaching steering rules (bnc#1012382).
– net/mlx4_core: Fix memory leak while delete slave’s resources
(bsc#966191 bsc#966186).
– net/mlx4_en: Avoid adding steering rules with invalid ring (bnc#1012382).
– net/mlx4_en: Fix mixed PFC and Global pause user control requests
(bsc#1015336 bsc#1015337 bsc#1015340).
– net/mlx5: Fix error handling in load one (bsc#1015342 bsc#1015343).
– net/mlx5: Fix ingress/egress naming mistake (bsc#1015342 bsc#1015343).
– net/mlx5: Tolerate irq_set_affinity_hint() failures (bnc#1012382).
– net/mlx5: avoid build warning for uniprocessor (bnc#1012382).
– net/mlx5e: Add error print in ETS init (bsc#966170 bsc#966172).
– net/mlx5e: Check support before TC swap in ETS init (bsc#966170
bsc#966172).
– net/mlx5e: E-Switch, Use the name of static array instead of its address
(bsc#1015342 bsc#1015343).
– net/mlx5e: Remove unused define MLX5_MPWRQ_STRIDES_PER_PAGE (bsc#1015342
bsc#1015343).
– net/sched: fix NULL dereference in the error path of tcf_bpf_init()
(bnc#1012382).
– net: Fix hlist corruptions in inet_evict_bucket() (bnc#1012382).
– net: Only honor ifindex in IP_PKTINFO if non-0 (bnc#1012382).
– net: cavium: liquidio: fix up “Avoid dma_unmap_single on uninitialized
ndata” (bnc#1012382).
– net: cdc_ncm: Fix TX zero padding (bnc#1012382).
– net: emac: fix reset timeout with AR8035 phy (bnc#1012382).
– net: ethernet: arc: Fix a potential memory leak if an optional regulator
is deferred (bnc#1012382).
– net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII
PHY interface (bnc#1012382).
– net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow
control (bnc#1012382).
– net: fec: Fix unbalanced PM runtime calls (bnc#1012382).
– net: fix possible out-of-bound read in skb_network_protocol()
(bnc#1012382).
– net: fix race on decreasing number of TX queues (bnc#1012382).
– net: fool proof dev_valid_name() (bnc#1012382).
– net: freescale: fix potential null pointer dereference (bnc#1012382).
– net: hns: Fix ethtool private flags (bnc#1012382 bsc#1085511).
– net: hns: Fix ethtool private flags (bsc#1085511).
– net: ieee802154: fix net_device reference release too early
(bnc#1012382).
– net: ipv4: avoid unused variable warning for sysctl (git-fixes).
– net: ipv4: do not allow setting net.ipv4.route.min_pmtu below 68
(bnc#1012382).
– net: ipv6: send unsolicited NA after DAD (git-fixes).
– net: ipv6: send unsolicited NA on admin up (bnc#1012382).
– net: llc: add lock_sock in llc_ui_bind to avoid a race condition
(bnc#1012382).
– net: move somaxconn init from sysctl code (bnc#1012382).
– net: mpls: Pull common label check into helper (bnc#1012382).
– net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support
(bnc#1012382).
– net: qca_spi: Fix alignment issues in rx path (bnc#1012382).
– net: systemport: Rewrite __bcm_sysport_tx_reclaim() (bnc#1012382).
– net: x25: fix one potential use-after-free issue (bnc#1012382).
– net: xfrm: allow clearing socket xfrm policies (bnc#1012382).
– net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
(bnc#1012382).
– netfilter: IDLETIMER: be syzkaller friendly (bnc#1012382).
– netfilter: add back stackpointer size checks (bnc#1012382).
– netfilter: bridge: ebt_among: add missing match size checks
(bnc#1012382).
– netfilter: bridge: ebt_among: add more missing match size checks
(bnc#1012382).
– netfilter: ctnetlink: Make some parameters integer to avoid enum
mismatch (bnc#1012382).
– netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize
(bnc#1012382).
– netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt
(bnc#1012382).
– netfilter: nat: cope with negative port range (bnc#1012382).
– netfilter: nf_nat_h323: fix logical-not-parentheses warning
(bnc#1012382).
– netfilter: use skb_to_full_sk in ip_route_me_harder (bnc#1012382).
– netfilter: x_tables: add and use xt_check_proc_name (bnc#1012382).
– netfilter: x_tables: fix missing timer initialization in xt_LED
(bnc#1012382).
– netfilter: xt_CT: fix refcnt leak on error path (bnc#1012382).
– netlink: avoid a double skb free in genlmsg_mcast() (bnc#1012382).
– netlink: ensure to loop over all netns in genlmsg_multicast_allns()
(bnc#1012382).
– netlink: make sure nladdr has correct size in netlink_connect()
(bnc#1012382).
– nfsd4: permit layoutget of executable-only files (bnc#1012382).
– nospec: Allow index argument to have const-qualified type (bnc#1012382).
– nospec: Include asm/barrier.h dependency (bnc#1012382).
– nospec: Kill array_index_nospec_mask_check() (bnc#1012382).
– nospec: Move array_index_nospec() parameter checking into separate macro
(bnc#1012382).
– nvme/rdma: do no start error recovery twice (bsc#1084967).
– nvme: do not send keep-alive frames during reset (bsc#1084223).
– nvme: do not send keep-alives to the discovery controller (bsc#1086607).
– nvme: expand nvmf_check_if_ready checks (bsc#1085058).
– nvmet_fc: prevent new io rqsts in possible isr completions (bsc#1083574).
– of: fix of_device_get_modalias returned length when truncating buffers
(bnc#1012382).
– openvswitch: Delete conntrack entry clashing with an expectation
(bnc#1012382).
– ovl: filter trusted xattr for non-admin (bnc#1012382).
– pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
(bnc#1012382).
– parport_pc: Add support for WCH CH382L PCI-E single parallel port card
(bnc#1012382).
– partitions/msdos: Unable to mount UFS 44bsd partitions (bnc#1012382).
– perf header: Set proper module name when build-id event found
(bnc#1012382).
– perf inject: Copy events when reordering events in pipe mode
(bnc#1012382).
– perf probe: Add warning message if there is unexpected event name
(bnc#1012382).
– perf probe: Return errno when not hitting any event (bnc#1012382).
– perf report: Ensure the perf DSO mapping matches what libdw sees
(bnc#1012382).
– perf session: Do not rely on evlist in pipe mode (bnc#1012382).
– perf sort: Fix segfault with basic block ‘cycles’ sort dimension
(bnc#1012382).
– perf tests kmod-path: Do not fail if compressed modules are not
supported (bnc#1012382).
– perf tests: Decompress kernel module before objdump (bnc#1012382).
– perf tools: Fix copyfile_offset update of output offset (bnc#1012382).
– perf tools: Make perf_event__synthesize_mmap_events() scale
(bnc#1012382).
– perf trace: Add mmap alias for s390 (bnc#1012382).
– perf/core: Correct event creation with PERF_FORMAT_GROUP (bnc#1012382).
– perf/core: Fix locking for children siblings group read (git-fixes).
– perf/hwbp: Simplify the perf-hwbp code, fix documentation (bnc#1012382).
– perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on
Skylake servers (bsc#1086357).
– perf/x86/intel: Do not accidentally clear high bits in
bdw_limit_period() (bnc#1012382).
– pidns: disable pid allocation if pid_ns_prepare_proc() is failed in
alloc_pid() (bnc#1012382).
– pinctrl: Really force states during suspend/resume (bnc#1012382).
– platform/chrome: Use proper protocol transfer function (bnc#1012382).
– platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA (bnc#1012382).
– power: supply: pda_power: move from timer to delayed_work (bnc#1012382).
– powerpc/[booke|4xx]: Do not clobber TCR[WP] when setting TCR[DIE]
(bnc#1012382).
– powerpc/crash: Remove the test for cpu_online in the IPI callback
(bsc#1088242).
– powerpc/spufs: Fix coredump of SPU contexts (bnc#1012382).
– powerpc: Do not send system reset request through the oops path
(bsc#1088242).
– powerpc: System reset avoid interleaving oops using die synchronisation
(bsc#1088242).
– ppp: prevent unregistered channels from connecting to PPP units
(bnc#1012382).
– pptp: remove a buggy dst release in pptp_connect() (bnc#1012382).
– pty: cancel pty slave port buf’s work in tty_release (bnc#1012382).
– pwm: tegra: Increase precision in PWM rate calculation (bnc#1012382).
– qed: Free RoCE ILT Memory on rmmod qedr (bsc#1019695 bsc#1019699
bsc#1022604).
– qed: Use after free in qed_rdma_free() (bsc#1019695 bsc#1019699
bsc#1022604).
– qeth: repair SBAL elements calculation (bnc#1085507, LTC#165484).
– qlcnic: fix unchecked return value (bnc#1012382).
– qlge: Avoid reading past end of buffer (bnc#1012382).
– r8169: fix setting driver_data after register_netdev (bnc#1012382).
– random: use lockless method of accessing and updating f->eg_idx
(bnc#1012382).
– ray_cs: Avoid reading past end of buffer (bnc#1012382).
– rcutorture/configinit: Fix build directory error message (bnc#1012382).
– rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
(bnc#1012382).
– regmap-i2c: Off by one in regmap_i2c_smbus_i2c_read/write()
(bsc#1031717).
– regmap: Do not use format_val in regmap_bulk_read (bsc#1031717).
– regmap: Fix reversed bounds check in regmap_raw_write() (bsc#1031717).
– regmap: Format data for raw write in regmap_bulk_write (bsc#1031717).
– regulator: anatop: set default voltage selector for pcie (bnc#1012382).
– reiserfs: Make cancel_old_flush() reliable (bnc#1012382).
– rndis_wlan: add return value validation (bnc#1012382).
– rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
(bnc#1012382).
– rtc: interface: Validate alarm-time before handling rollover
(bnc#1012382).
– rtc: opal: Handle disabled TPO in opal_get_tpo_time() (bnc#1012382).
– rtc: snvs: fix an incorrect check of return value (bnc#1012382).
– rtlwifi: rtl8723be: Fix loss of signal (bnc#1012382).
– rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled (bnc#1012382).
– rxrpc: check return value of skb_to_sgvec always (bnc#1012382).
– s390/dasd: fix hanging safe offline (bnc#1012382).
– s390/mm: fix local TLB flushing vs. detach of an mm address space
(bnc#1088324, LTC#166470).
– s390/mm: fix race on mm->context.flush_mm (bnc#1088324, LTC#166470).
– s390/mm: no local TLB flush for clearing-by-ASCE IDTE (bnc#1088324,
LTC#166470).
– s390/qeth: apply takeover changes when mode is toggled (bnc#1085507,
LTC#165490).
– s390/qeth: do not apply takeover changes to RXIP (bnc#1085507,
LTC#165490).
– s390/qeth: fix IP address lookup for L3 devices (bnc#1085507,
LTC#165491).
– s390/qeth: fix IP removal on offline cards (bnc#1085507, LTC#165491).
– s390/qeth: fix IPA command submission race (bnc#1012382).
– s390/qeth: fix SETIP command handling (bnc#1012382).
– s390/qeth: fix double-free on IP add/remove race (bnc#1085507,
LTC#165491).
– s390/qeth: free netdevice when removing a card (bnc#1012382).
– s390/qeth: improve error reporting on IP add/removal (bnc#1085507,
LTC#165491).
– s390/qeth: lock IP table while applying takeover changes (bnc#1085507,
LTC#165490).
– s390/qeth: lock read device while queueing next buffer (bnc#1012382).
– s390/qeth: on channel error, reject further cmd requests (bnc#1012382).
– s390/qeth: update takeover IPs after configuration change (bnc#1085507,
LTC#165490).
– s390/qeth: when thread completes, wake up all waiters (bnc#1012382).
– s390: move _text symbol to address higher than zero (bnc#1012382).
– sched/numa: Use down_read_trylock() for the mmap_sem (bnc#1012382).
– sched: Stop resched_cpu() from sending IPIs to offline CPUs
(bnc#1012382).
– sched: Stop switched_to_rt() from sending IPIs to offline CPUs
(bnc#1012382).
– sched: act_csum: do not mangle TCP and UDP GSO packets (bnc#1012382).
– scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
(bnc#1012382).
– scsi: core: scsi_get_device_flags_keyed(): Always return device flags
(bnc#1012382).
– scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
(bnc#1012382).
– scsi: dh: add new rdac devices (bnc#1012382).
– scsi: libiscsi: Allow sd_shutdown on bad transport (bnc#1012382).
– scsi: libsas: initialize sas_phy status according to response of
DISCOVER (bnc#1012382).
– scsi: lpfc: Add missing unlock in WQ full logic (bsc#1085383).
– scsi: lpfc: Add per io channel NVME IO statistics (bsc#1088865).
– scsi: lpfc: Code cleanup for 128byte wqe data type (bsc#1085383).
– scsi: lpfc: Correct missing remoteport registration during link bounces
(bsc#1088865).
– scsi: lpfc: Correct target queue depth application changes (bsc#1088865).
– scsi: lpfc: Enlarge nvmet asynchronous receive buffer counts
(bsc#1088865).
– scsi: lpfc: Fix Abort request WQ selection (bsc#1088865).
– scsi: lpfc: Fix NULL pointer access in lpfc_nvme_info_show (bsc#1088865).
– scsi: lpfc: Fix NULL pointer reference when resetting adapter
(bsc#1088865).
– scsi: lpfc: Fix NVME Initiator FirstBurst (bsc#1085383).
– scsi: lpfc: Fix SCSI lun discovery when port configured for both SCSI
and NVME (bsc#1085383).
– scsi: lpfc: Fix WQ/CQ creation for older asic’s (bsc#1088865).
– scsi: lpfc: Fix driver not recovering NVME rports during target link
faults (bsc#1088865).
– scsi: lpfc: Fix lingering lpfc_wq resource after driver unload
(bsc#1088865).
– scsi: lpfc: Fix mailbox wait for POST_SGL mbox command (bsc#1085383).
– scsi: lpfc: Fix multiple PRLI completion error path (bsc#1088865).
– scsi: lpfc: Fix nvme remoteport registration race conditions
(bsc#1088865).
– scsi: lpfc: Memory allocation error during driver start-up on power8
(bsc#1085383).
– scsi: lpfc: update driver version to 11.4.0.7-2 (bsc#1088865).
– scsi: mac_esp: Replace bogus memory barrier with spinlock (bnc#1012382).
– scsi: mpt3sas: Proper handling of set/clear of “ATA command pending”
flag (bnc#1012382).
– scsi: sg: check for valid direction before starting the request
(bnc#1012382).
– scsi: sg: fix SG_DXFER_FROM_DEV transfers (bnc#1012382).
– scsi: sg: fix static checker warning in sg_is_valid_dxfer (bnc#1012382).
– scsi: sg: only check for dxfer_len greater than 256M (bnc#1012382
bsc#1064206).
– scsi: virtio_scsi: Always try to read VPD pages (bnc#1012382).
– scsi: virtio_scsi: always read VPD pages for multiqueue too (git-fixes).
– sctp: do not leak kernel memory to user space (bnc#1012382).
– sctp: fix dst refcnt leak in sctp_v4_get_dst (bnc#1012382).
– sctp: fix dst refcnt leak in sctp_v6_get_dst() (bnc#1012382).
– sctp: fix recursive locking warning in sctp_do_peeloff (bnc#1012382).
– sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
(bnc#1012382).
– sctp: verify size of a new chunk in _sctp_make_chunk() (bnc#1012382).
– selftests/powerpc: Fix TM resched DSCR test with some compilers
(bnc#1012382).
– selftests/x86/entry_from_vm86: Add test cases for POPF (bnc#1012382).
– selftests/x86/entry_from_vm86: Exit with 1 if we fail (bnc#1012382).
– selftests/x86: Add tests for User-Mode Instruction Prevention
(bnc#1012382).
– selftests/x86: Add tests for the STR and SLDT instructions (bnc#1012382).
– selinux: Remove redundant check for unknown labeling behavior
(bnc#1012382).
– selinux: Remove unnecessary check of array base in selinux_set_mapping()
(bnc#1012382).
– selinux: check for address length in selinux_socket_bind() (bnc#1012382).
– selinux: do not check open permission on sockets (bnc#1012382).
– serial: 8250: omap: Disable DMA for console UART (bnc#1012382).
– serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
(bnc#1012382).
– serial: sh-sci: Fix race condition causing garbage during shutdown
(bnc#1012382).
– serial: sh-sci: prevent lockup on full TTY buffers (bnc#1012382).
– sh_eth: Use platform device for printing before register_netdev()
(bnc#1012382).
– sit: reload iphdr in ipip6_rcv (bnc#1012382).
– skbuff: Fix not waking applications when errors are enqueued
(bnc#1012382).
– skbuff: only inherit relevant tx_flags (bnc#1012382).
– skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow
(bnc#1012382).
– sky2: Increase D3 delay to sky2 stops working after suspend
(bnc#1012382).
– sm501fb: do not return zero on failure path in sm501fb_start()
(bnc#1012382).
– solo6x10: release vb2 buffers in solo_stop_streaming() (bnc#1012382).
– sparc64: ldc abort during vds iso boot (bnc#1012382).
– spi: davinci: fix up dma_mapping_error() incorrect patch (bnc#1012382).
– spi: dw: Disable clock after unregistering the host (bnc#1012382).
– spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
(bnc#1012382).
– spi: sun6i: disable/unprepare clocks on remove (bnc#1012382).
– staging: android: ashmem: Fix lockdep issue during llseek (bnc#1012382).
– staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
(bnc#1012382).
– staging: comedi: fix comedi_nsamples_left (bnc#1012382).
– staging: comedi: ni_mio_common: ack ai fifo error interrupts
(bnc#1012382).
– staging: lustre: ptlrpc: kfree used instead of kvfree (bnc#1012382).
– staging: ncpfs: memory corruption in ncp_read_kernel() (bnc#1012382).
– staging: speakup: Replace BUG_ON() with WARN_ON() (bnc#1012382).
– staging: unisys: visorhba: fix s-Par to boot with option
CONFIG_VMAP_STACK set to y (bnc#1012382).
– staging: wilc1000: add check for kmalloc allocation failure
(bnc#1012382).
– staging: wilc1000: fix unchecked return value (bnc#1012382).
– staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before
calling hfa384x_drvr_setconfig16, also fixes relative sparse warning
(bnc#1012382).
– sysrq: Reset the watchdog timers while displaying high-resolution timers
(bnc#1012382).
– tags: honor COMPILED_SOURCE with apart output directory (bnc#1012382).
– target: prefer dbroot of /etc/target over /var/target (bsc#1087274).
– tcm_fileio: Prevent information leak for short reads (bnc#1012382).
– tcp: better validation of received ack sequences (bnc#1012382).
– tcp: remove poll() flakes with FastOpen (bnc#1012382).
– tcp: sysctl: Fix a race to avoid unexpected 0 window from space
(bnc#1012382).
– team: Fix double free in error path (bnc#1012382).
– test_firmware: fix setting old custom fw path back on exit (bnc#1012382).
– thermal: power_allocator: fix one race condition issue for
thermal_instances list (bnc#1012382).
– time: Change posix clocks ops interfaces to use timespec64 (bnc#1012382).
– timers, sched_clock: Update timeout for clock wrap (bnc#1012382).
– tools/usbip: fixes build with musl libc toolchain (bnc#1012382).
– tpm/tpm_crb: Use start method value from ACPI table directly
(bsc#1084452).
– tpm: st33zp24: fix potential buffer overruns caused by bit glitches on
the bus (bnc#1012382).
– tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches
on the bus (bnc#1012382).
– tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on
the bus (bnc#1012382).
– tracing: probeevent: Fix to support minus offset from symbol
(bnc#1012382).
– tty/serial: atmel: add new version check for usart (bnc#1012382).
– tty: n_gsm: Allow ADM response in addition to UA for control dlci
(bnc#1012382).
– tty: provide tty_name() even without CONFIG_TTY (bnc#1012382).
– tty: vt: fix up tabstops properly (bnc#1012382).
– uas: fix comparison for error code (bnc#1012382).
– ubi: Fix race condition between ubi volume creation and udev
(bnc#1012382).
– udplite: fix partial checksum initialization (bnc#1012382).
– usb: Do not print a warning if interface driver rebind is deferred at
resume (bsc#1087211).
– usb: chipidea: properly handle host or gadget initialization failure
(bnc#1012382).
– usb: dwc2: Improve gadget state disconnection handling (bnc#1012382).
– usb: dwc2: Make sure we disconnect the gadget state (bnc#1012382).
– usb: dwc3: keystone: check return value (bnc#1012382).
– usb: gadget: align buffer size when allocating for OUT endpoint
(bnc#1012382).
– usb: gadget: bdc: 64-bit pointer capability check (bnc#1012382).
– usb: gadget: change len to size_t on alloc_ep_req() (bnc#1012382).
– usb: gadget: define free_ep_req as universal function (bnc#1012382).
– usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in
dummy_hub_control() (bnc#1012382).
– usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb() (bnc#1012382).
– usb: gadget: f_hid: fix: Prevent accessing released memory (bnc#1012382).
– usb: gadget: fix request length error for isoc transfer (git-fixes).
– usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align
(bnc#1012382).
– usb: quirks: add control message delay for 1b1c:1b20 (bnc#1012382).
– usb: usbmon: Read text within supplied buffer size (bnc#1012382).
– veth: set peer GSO values (bnc#1012382).
– vfb: fix video mode and line_length being set when loaded (bnc#1012382).
– vgacon: Set VGA struct resource types (bnc#1012382).
– vhost: correctly remove wait queue during poll failure (bnc#1012382).
– video/hdmi: Allow “empty” HDMI infoframes (bnc#1012382).
– video: ARM CLCD: fix dma allocation size (bnc#1012382).
– video: fbdev: udlfb: Fix buffer on stack (bnc#1012382).
– virtio_net: check return value of skb_to_sgvec always (bnc#1012382).
– virtio_net: check return value of skb_to_sgvec in one more location
(bnc#1012382).
– vlan: also check phy_driver ts_info for vlan’s real device (bnc#1012382).
– vmxnet3: ensure that adapter is in proper state during force_close
(bnc#1012382).
– vrf: Fix use after free and double free in vrf_finish_output
(bnc#1012382).
– vt: change SGR 21 to follow the standards (bnc#1012382).
– vti6: better validate user provided tunnel names (bnc#1012382).
– vxlan: dont migrate permanent fdb entries during learn (bnc#1012382).
– vxlan: vxlan dev should inherit lowerdev’s gso_max_size (bnc#1012382).
– wan: pc300too: abort path on failure (bnc#1012382).
– watchdog: hpwdt: Check source of NMI (bnc#1012382).
– watchdog: hpwdt: Remove legacy NMI sourcing (bsc#1085185).
– watchdog: hpwdt: SMBIOS check (bnc#1012382).
– watchdog: hpwdt: fix unused variable warning (bnc#1012382).
– watchdog: sbsa: use 32-bit read for WCV (bsc#1085679).
– wil6210: fix memory access violation in wil_memcpy_from/toio_32
(bnc#1012382).
– wl1251: check return from call to wl1251_acx_arp_ip_filter (bnc#1012382).
– workqueue: Allow retrieval of current task’s work struct (bnc#1012382).
– writeback: fix the wrong congested state variable definition
(bnc#1012382).
– x86/MCE: Serialize sysfs changes (bnc#1012382).
– x86/apic/vector: Handle legacy irq data correctly (bnc#1012382).
– x86/asm: Do not use RBP as a temporary register in
csum_partial_copy_generic() (bnc#1012382).
– x86/boot/64: Verify alignment of the LOAD segment (bnc#1012382).
– x86/build/64: Force the linker to use 2MB page size (bnc#1012382).
– x86/entry/64: Do not use IST entry for #BP stack (bsc#1087088).
– x86/kaiser: Duplicate cpu_tss for an entry trampoline usage (bsc#1077560
bsc#1083836).
– x86/kaiser: Remove a user mapping of cpu_tss structure (bsc#1077560
bsc#1083836).
– x86/kaiser: Use a per-CPU trampoline stack for kernel entry
(bsc#1077560).
– x86/kaiser: enforce trampoline stack alignment (bsc#1087260).
– x86/mm: Fix vmalloc_fault to use pXd_large (bnc#1012382).
– x86/mm: implement free pmd/pte page interfaces (bnc#1012382).
– x86/module: Detect and skip invalid relocations (bnc#1012382).
– x86/platform/uv: Skip UV runtime services mapping in the
efi_runtime_disabled case (bsc#1089925).
– x86/speculation: Remove Skylake C2 from Speculation Control microcode
blacklist (bsc#1087845).
– x86/tsc: Provide ‘tsc=unstable’ boot parameter (bnc#1012382).
– x86/vm86/32: Fix POPF emulation (bnc#1012382).
– x86: Treat R_X86_64_PLT32 as R_X86_64_PC32 (bnc#1012382).
– x86: i8259: export legacy_pic symbol (bnc#1012382).
– xen-blkfront: fix mq start/stop race (bsc#1085042).
– xen-netback: use skb to determine number of required guest Rx requests
(bsc#1046610).
– xen: avoid type warning in xchg_xen_ulong (bnc#1012382).
– xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit
systems (bnc#1012382).
– xfrm: fix state migration copy replay sequence numbers (bnc#1012382).
– xfrm_user: uncoditionally validate esn replay attribute struct
(bnc#1012382).

Patch Instructions:

To install this SUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– SUSE Linux Enterprise Real Time Extension 12-SP3:

zypper in -t patch SUSE-SLE-RT-12-SP3-2018-842=1

Package List:

– SUSE Linux Enterprise Real Time Extension 12-SP3 (x86_64):

cluster-md-kmp-rt-4.4.128-3.11.1
cluster-md-kmp-rt-debuginfo-4.4.128-3.11.1
dlm-kmp-rt-4.4.128-3.11.1
dlm-kmp-rt-debuginfo-4.4.128-3.11.1
gfs2-kmp-rt-4.4.128-3.11.1
gfs2-kmp-rt-debuginfo-4.4.128-3.11.1
kernel-rt-4.4.128-3.11.1
kernel-rt-base-4.4.128-3.11.1
kernel-rt-base-debuginfo-4.4.128-3.11.1
kernel-rt-debuginfo-4.4.128-3.11.1
kernel-rt-debugsource-4.4.128-3.11.1
kernel-rt-devel-4.4.128-3.11.1
kernel-rt_debug-debuginfo-4.4.128-3.11.1
kernel-rt_debug-debugsource-4.4.128-3.11.1
kernel-rt_debug-devel-4.4.128-3.11.1
kernel-rt_debug-devel-debuginfo-4.4.128-3.11.1
kernel-syms-rt-4.4.128-3.11.1
ocfs2-kmp-rt-4.4.128-3.11.1
ocfs2-kmp-rt-debuginfo-4.4.128-3.11.1

– SUSE Linux Enterprise Real Time Extension 12-SP3 (noarch):

kernel-devel-rt-4.4.128-3.11.1
kernel-source-rt-4.4.128-3.11.1

References:

https://www.suse.com/security/cve/CVE-2017-18257.html
https://www.suse.com/security/cve/CVE-2018-10087.html
https://www.suse.com/security/cve/CVE-2018-10124.html
https://www.suse.com/security/cve/CVE-2018-1091.html
https://www.suse.com/security/cve/CVE-2018-7740.html
https://www.suse.com/security/cve/CVE-2018-8043.html
https://www.suse.com/security/cve/CVE-2018-8822.html
https://bugzilla.suse.com/1005778
https://bugzilla.suse.com/1005780
https://bugzilla.suse.com/1005781
https://bugzilla.suse.com/1012382
https://bugzilla.suse.com/1015336
https://bugzilla.suse.com/1015337
https://bugzilla.suse.com/1015340
https://bugzilla.suse.com/1015342
https://bugzilla.suse.com/1015343
https://bugzilla.suse.com/1019695
https://bugzilla.suse.com/1019699
https://bugzilla.suse.com/1022604
https://bugzilla.suse.com/1022743
https://bugzilla.suse.com/1024296
https://bugzilla.suse.com/1031717
https://bugzilla.suse.com/1046610
https://bugzilla.suse.com/1060799
https://bugzilla.suse.com/1064206
https://bugzilla.suse.com/1068032
https://bugzilla.suse.com/1073059
https://bugzilla.suse.com/1073069
https://bugzilla.suse.com/1075091
https://bugzilla.suse.com/1075428
https://bugzilla.suse.com/1075994
https://bugzilla.suse.com/1076033
https://bugzilla.suse.com/1077560
https://bugzilla.suse.com/1083125
https://bugzilla.suse.com/1083574
https://bugzilla.suse.com/1083745
https://bugzilla.suse.com/1083836
https://bugzilla.suse.com/1084223
https://bugzilla.suse.com/1084310
https://bugzilla.suse.com/1084328
https://bugzilla.suse.com/1084353
https://bugzilla.suse.com/1084452
https://bugzilla.suse.com/1084610
https://bugzilla.suse.com/1084699
https://bugzilla.suse.com/1084721
https://bugzilla.suse.com/1084829
https://bugzilla.suse.com/1084889
https://bugzilla.suse.com/1084898
https://bugzilla.suse.com/1084914
https://bugzilla.suse.com/1084918
https://bugzilla.suse.com/1084967
https://bugzilla.suse.com/1085042
https://bugzilla.suse.com/1085058
https://bugzilla.suse.com/1085185
https://bugzilla.suse.com/1085224
https://bugzilla.suse.com/1085383
https://bugzilla.suse.com/1085402
https://bugzilla.suse.com/1085404
https://bugzilla.suse.com/1085487
https://bugzilla.suse.com/1085507
https://bugzilla.suse.com/1085511
https://bugzilla.suse.com/1085679
https://bugzilla.suse.com/1085958
https://bugzilla.suse.com/1085981
https://bugzilla.suse.com/1086015
https://bugzilla.suse.com/1086162
https://bugzilla.suse.com/1086194
https://bugzilla.suse.com/1086357
https://bugzilla.suse.com/1086499
https://bugzilla.suse.com/1086518
https://bugzilla.suse.com/1086607
https://bugzilla.suse.com/1087088
https://bugzilla.suse.com/1087211
https://bugzilla.suse.com/1087231
https://bugzilla.suse.com/1087260
https://bugzilla.suse.com/1087274
https://bugzilla.suse.com/1087659
https://bugzilla.suse.com/1087845
https://bugzilla.suse.com/1087906
https://bugzilla.suse.com/1087999
https://bugzilla.suse.com/1088050
https://bugzilla.suse.com/1088087
https://bugzilla.suse.com/1088242
https://bugzilla.suse.com/1088267
https://bugzilla.suse.com/1088313
https://bugzilla.suse.com/1088324
https://bugzilla.suse.com/1088600
https://bugzilla.suse.com/1088684
https://bugzilla.suse.com/1088865
https://bugzilla.suse.com/1088871
https://bugzilla.suse.com/1089198
https://bugzilla.suse.com/1089608
https://bugzilla.suse.com/1089644
https://bugzilla.suse.com/1089752
https://bugzilla.suse.com/1089925
https://bugzilla.suse.com/802154
https://bugzilla.suse.com/810912
https://bugzilla.suse.com/812592
https://bugzilla.suse.com/813453
https://bugzilla.suse.com/880131
https://bugzilla.suse.com/966170
https://bugzilla.suse.com/966172
https://bugzilla.suse.com/966186
https://bugzilla.suse.com/966191
https://bugzilla.suse.com/969476
https://bugzilla.suse.com/969477
https://bugzilla.suse.com/981348

—
To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org