openSUSE Security Update: Security update for systemd
______________________________________________________________________________

Announcement ID: openSUSE-SU-2019:0098-1
Rating: important
References: #1005023 #1045723 #1076696 #1080919 #1093753
#1101591 #1111498 #1114933 #1117063 #1119971
#1120323
Cross-References: CVE-2018-16864 CVE-2018-16865 CVE-2018-16866
CVE-2018-6954
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________

An update that solves four vulnerabilities and has 7 fixes
is now available.

Description:

This update for systemd provides the following fixes:

Security issues fixed:

– CVE-2018-16864, CVE-2018-16865: Fixed two memory corruptions through
attacker-controlled alloca()s (bsc#1120323)
– CVE-2018-16866: Fixed an information leak in journald (bsc#1120323)
– CVE-2018-6954: Fix mishandling of symlinks present in non-terminal path
components (bsc#1080919)
– Fixed an issue during system startup in relation to encrypted swap disks
(bsc#1119971)

Non-security issues fixed:

– pam_systemd: Fix ‘Cannot create session: Already running in a session’
(bsc#1111498)
– systemd-vconsole-setup: vconsole setup fails, fonts will not be copied
to tty (bsc#1114933)
– systemd-tmpfiles-setup: symlinked /tmp to /var/tmp breaking multiple
units (bsc#1045723)
– Fixed installation issue with /etc/machine-id during update (bsc#1117063)
– btrfs: qgroups are assigned to parent qgroups after reboot (bsc#1093753)
– logind: Stop managing VT switches if no sessions are registered on that
VT. (bsc#1101591)
– udev: Downgrade message when settting inotify watch up fails.
(bsc#1005023)
– udev: Ignore the exit code of systemd-detect-virt for memory hot-add.
In SLE-12-SP3, 80-hotplug-cpu-mem.rules has a memory hot-add rule that
uses systemd-detect-virt to detect non-zvm environment. The
systemd-detect-virt returns exit failure code when it detected _none_
state. The exit failure code causes that the hot-add memory block can
not be set to online. (bsc#1076696)

This update was imported from the SUSE:SLE-15:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– openSUSE Leap 15.0:

zypper in -t patch openSUSE-2019-98=1

Package List:

– openSUSE Leap 15.0 (i586 x86_64):

libsystemd0-234-lp150.20.12.1
libsystemd0-debuginfo-234-lp150.20.12.1
libsystemd0-mini-234-lp150.20.12.1
libsystemd0-mini-debuginfo-234-lp150.20.12.1
libudev-devel-234-lp150.20.12.1
libudev-mini-devel-234-lp150.20.12.1
libudev-mini1-234-lp150.20.12.1
libudev-mini1-debuginfo-234-lp150.20.12.1
libudev1-234-lp150.20.12.1
libudev1-debuginfo-234-lp150.20.12.1
nss-myhostname-234-lp150.20.12.1
nss-myhostname-debuginfo-234-lp150.20.12.1
nss-mymachines-234-lp150.20.12.1
nss-mymachines-debuginfo-234-lp150.20.12.1
nss-systemd-234-lp150.20.12.1
nss-systemd-debuginfo-234-lp150.20.12.1
systemd-234-lp150.20.12.1
systemd-container-234-lp150.20.12.1
systemd-container-debuginfo-234-lp150.20.12.1
systemd-coredump-234-lp150.20.12.1
systemd-coredump-debuginfo-234-lp150.20.12.1
systemd-debuginfo-234-lp150.20.12.1
systemd-debugsource-234-lp150.20.12.1
systemd-devel-234-lp150.20.12.1
systemd-logger-234-lp150.20.12.1
systemd-mini-234-lp150.20.12.1
systemd-mini-container-mini-234-lp150.20.12.1
systemd-mini-container-mini-debuginfo-234-lp150.20.12.1
systemd-mini-coredump-mini-234-lp150.20.12.1
systemd-mini-coredump-mini-debuginfo-234-lp150.20.12.1
systemd-mini-debuginfo-234-lp150.20.12.1
systemd-mini-debugsource-234-lp150.20.12.1
systemd-mini-devel-234-lp150.20.12.1
systemd-mini-sysvinit-234-lp150.20.12.1
systemd-sysvinit-234-lp150.20.12.1
udev-234-lp150.20.12.1
udev-debuginfo-234-lp150.20.12.1
udev-mini-234-lp150.20.12.1
udev-mini-debuginfo-234-lp150.20.12.1

– openSUSE Leap 15.0 (x86_64):

libsystemd0-32bit-234-lp150.20.12.1
libsystemd0-32bit-debuginfo-234-lp150.20.12.1
libudev-devel-32bit-234-lp150.20.12.1
libudev1-32bit-234-lp150.20.12.1
libudev1-32bit-debuginfo-234-lp150.20.12.1
nss-myhostname-32bit-234-lp150.20.12.1
nss-myhostname-32bit-debuginfo-234-lp150.20.12.1
nss-mymachines-32bit-234-lp150.20.12.1
nss-mymachines-32bit-debuginfo-234-lp150.20.12.1
systemd-32bit-234-lp150.20.12.1
systemd-32bit-debuginfo-234-lp150.20.12.1

– openSUSE Leap 15.0 (noarch):

systemd-bash-completion-234-lp150.20.12.1
systemd-mini-bash-completion-234-lp150.20.12.1

References:

https://www.suse.com/security/cve/CVE-2018-16864.html
https://www.suse.com/security/cve/CVE-2018-16865.html
https://www.suse.com/security/cve/CVE-2018-16866.html
https://www.suse.com/security/cve/CVE-2018-6954.html
https://bugzilla.suse.com/1005023
https://bugzilla.suse.com/1045723
https://bugzilla.suse.com/1076696
https://bugzilla.suse.com/1080919
https://bugzilla.suse.com/1093753
https://bugzilla.suse.com/1101591
https://bugzilla.suse.com/1111498
https://bugzilla.suse.com/1114933
https://bugzilla.suse.com/1117063
https://bugzilla.suse.com/1119971
https://bugzilla.suse.com/1120323

—
To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org

openSUSE Security Update: Security update for systemd
______________________________________________________________________________

Announcement ID: openSUSE-SU-2019:0097-1
Rating: moderate
References: #1005023 #1076696 #1101591 #1114981 #1115518
#1119971 #1120323
Cross-References: CVE-2018-16864 CVE-2018-16865 CVE-2018-16866

Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________

An update that solves three vulnerabilities and has four
fixes is now available.

Description:

This update for systemd provides the following fixes:

Security issues fixed:

– CVE-2018-16864, CVE-2018-16865: Fixed two memory corruptions through
attacker-controlled alloca()s (bsc#1120323)
– CVE-2018-16866: Fixed an information leak in journald (bsc#1120323)
– Fixed an issue during system startup in relation to encrypted swap disks
(bsc#1119971)

Non-security issues fixed:

– core: Queue loading transient units after setting their properties.
(bsc#1115518)
– logind: Stop managing VT switches if no sessions are registered on that
VT. (bsc#1101591)
– terminal-util: introduce vt_release() and vt_restore() helpers.
– terminal: Unify code for resetting kbd utf8 mode a bit.
– terminal Reset should honour default_utf8 kernel setting.
– logind: Make session_restore_vt() static.
– udev: Downgrade message when settting inotify watch up fails.
(bsc#1005023)
– log: Never log into foreign fd #2 in PID 1 or its pre-execve() children.
(bsc#1114981)
– udev: Ignore the exit code of systemd-detect-virt for memory hot-add.
In SLE-12-SP3, 80-hotplug-cpu-mem.rules has a memory hot-add rule that
uses systemd-detect-virt to detect non-zvm environment. The
systemd-detect-virt returns exit failure code when it detected _none_
state. The exit failure code causes that the hot-add memory block can
not be set to online. (bsc#1076696)

This update was imported from the SUSE:SLE-12-SP2:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– openSUSE Leap 42.3:

zypper in -t patch openSUSE-2019-97=1

Package List:

– openSUSE Leap 42.3 (i586 x86_64):

libsystemd0-228-65.1
libsystemd0-debuginfo-228-65.1
libsystemd0-mini-228-65.1
libsystemd0-mini-debuginfo-228-65.1
libudev-devel-228-65.1
libudev-mini-devel-228-65.1
libudev-mini1-228-65.1
libudev-mini1-debuginfo-228-65.1
libudev1-228-65.1
libudev1-debuginfo-228-65.1
nss-myhostname-228-65.1
nss-myhostname-debuginfo-228-65.1
nss-mymachines-228-65.1
nss-mymachines-debuginfo-228-65.1
systemd-228-65.1
systemd-debuginfo-228-65.1
systemd-debugsource-228-65.1
systemd-devel-228-65.1
systemd-logger-228-65.1
systemd-mini-228-65.1
systemd-mini-debuginfo-228-65.1
systemd-mini-debugsource-228-65.1
systemd-mini-devel-228-65.1
systemd-mini-sysvinit-228-65.1
systemd-sysvinit-228-65.1
udev-228-65.1
udev-debuginfo-228-65.1
udev-mini-228-65.1
udev-mini-debuginfo-228-65.1

– openSUSE Leap 42.3 (noarch):

systemd-bash-completion-228-65.1
systemd-mini-bash-completion-228-65.1

– openSUSE Leap 42.3 (x86_64):

libsystemd0-32bit-228-65.1
libsystemd0-debuginfo-32bit-228-65.1
libudev1-32bit-228-65.1
libudev1-debuginfo-32bit-228-65.1
nss-myhostname-32bit-228-65.1
nss-myhostname-debuginfo-32bit-228-65.1
systemd-32bit-228-65.1
systemd-debuginfo-32bit-228-65.1

References:

https://www.suse.com/security/cve/CVE-2018-16864.html
https://www.suse.com/security/cve/CVE-2018-16865.html
https://www.suse.com/security/cve/CVE-2018-16866.html
https://bugzilla.suse.com/1005023
https://bugzilla.suse.com/1076696
https://bugzilla.suse.com/1101591
https://bugzilla.suse.com/1114981
https://bugzilla.suse.com/1115518
https://bugzilla.suse.com/1119971
https://bugzilla.suse.com/1120323

—
To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org