You are here
Home > Preporuke > Sigurnosni nedostaci programskog paketa bind

Sigurnosni nedostaci programskog paketa bind

  • Detalji os-a: WN7
  • Važnost: IMP
  • Operativni sustavi: L
  • Kategorije: LSU

openSUSE Security Update: Security update for bind
______________________________________________________________________________

Announcement ID: openSUSE-SU-2019:1533-1
Rating: important
References: #1104129 #1126068 #1126069 #1133185
Cross-References: CVE-2018-5740 CVE-2018-5743 CVE-2018-5745
CVE-2019-6465
Affected Products:
openSUSE Leap 15.1
openSUSE Leap 15.0
______________________________________________________________________________

An update that fixes four vulnerabilities is now available.

Description:

This update for bind fixes the following issues:

Security issues fixed:

– CVE-2019-6465: Fixed an issue where controls for zone transfers may not
be properly applied to Dynamically Loadable Zones (bsc#1126069).
– CVE-2018-5745: Fixed a denial of service vulnerability if a trust anchor
rolls over to an unsupported key algorithm when using managed-keys
(bsc#1126068).
– CVE-2018-5743: Fixed a denial of service vulnerability which could be
caused by to many simultaneous TCP connections (bsc#1133185).
– CVE-2018-5740: Fixed a denial of service vulnerability in the
“deny-answer-aliases” feature (bsc#1104129).

This update was imported from the SUSE:SLE-15:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– openSUSE Leap 15.1:

zypper in -t patch openSUSE-2019-1533=1

– openSUSE Leap 15.0:

zypper in -t patch openSUSE-2019-1533=1

Package List:

– openSUSE Leap 15.1 (i586 x86_64):

bind-9.11.2-lp151.11.3.1
bind-chrootenv-9.11.2-lp151.11.3.1
bind-debuginfo-9.11.2-lp151.11.3.1
bind-debugsource-9.11.2-lp151.11.3.1
bind-devel-9.11.2-lp151.11.3.1
bind-lwresd-9.11.2-lp151.11.3.1
bind-lwresd-debuginfo-9.11.2-lp151.11.3.1
bind-utils-9.11.2-lp151.11.3.1
bind-utils-debuginfo-9.11.2-lp151.11.3.1
libbind9-160-9.11.2-lp151.11.3.1
libbind9-160-debuginfo-9.11.2-lp151.11.3.1
libdns169-9.11.2-lp151.11.3.1
libdns169-debuginfo-9.11.2-lp151.11.3.1
libirs-devel-9.11.2-lp151.11.3.1
libirs160-9.11.2-lp151.11.3.1
libirs160-debuginfo-9.11.2-lp151.11.3.1
libisc166-9.11.2-lp151.11.3.1
libisc166-debuginfo-9.11.2-lp151.11.3.1
libisccc160-9.11.2-lp151.11.3.1
libisccc160-debuginfo-9.11.2-lp151.11.3.1
libisccfg160-9.11.2-lp151.11.3.1
libisccfg160-debuginfo-9.11.2-lp151.11.3.1
liblwres160-9.11.2-lp151.11.3.1
liblwres160-debuginfo-9.11.2-lp151.11.3.1

– openSUSE Leap 15.1 (x86_64):

bind-devel-32bit-9.11.2-lp151.11.3.1
libbind9-160-32bit-9.11.2-lp151.11.3.1
libbind9-160-32bit-debuginfo-9.11.2-lp151.11.3.1
libdns169-32bit-9.11.2-lp151.11.3.1
libdns169-32bit-debuginfo-9.11.2-lp151.11.3.1
libirs160-32bit-9.11.2-lp151.11.3.1
libirs160-32bit-debuginfo-9.11.2-lp151.11.3.1
libisc166-32bit-9.11.2-lp151.11.3.1
libisc166-32bit-debuginfo-9.11.2-lp151.11.3.1
libisccc160-32bit-9.11.2-lp151.11.3.1
libisccc160-32bit-debuginfo-9.11.2-lp151.11.3.1
libisccfg160-32bit-9.11.2-lp151.11.3.1
libisccfg160-32bit-debuginfo-9.11.2-lp151.11.3.1
liblwres160-32bit-9.11.2-lp151.11.3.1
liblwres160-32bit-debuginfo-9.11.2-lp151.11.3.1

– openSUSE Leap 15.1 (noarch):

bind-doc-9.11.2-lp151.11.3.1
python3-bind-9.11.2-lp151.11.3.1

– openSUSE Leap 15.0 (i586 x86_64):

bind-9.11.2-lp150.8.13.1
bind-chrootenv-9.11.2-lp150.8.13.1
bind-debuginfo-9.11.2-lp150.8.13.1
bind-debugsource-9.11.2-lp150.8.13.1
bind-devel-9.11.2-lp150.8.13.1
bind-lwresd-9.11.2-lp150.8.13.1
bind-lwresd-debuginfo-9.11.2-lp150.8.13.1
bind-utils-9.11.2-lp150.8.13.1
bind-utils-debuginfo-9.11.2-lp150.8.13.1
libbind9-160-9.11.2-lp150.8.13.1
libbind9-160-debuginfo-9.11.2-lp150.8.13.1
libdns169-9.11.2-lp150.8.13.1
libdns169-debuginfo-9.11.2-lp150.8.13.1
libirs-devel-9.11.2-lp150.8.13.1
libirs160-9.11.2-lp150.8.13.1
libirs160-debuginfo-9.11.2-lp150.8.13.1
libisc166-9.11.2-lp150.8.13.1
libisc166-debuginfo-9.11.2-lp150.8.13.1
libisccc160-9.11.2-lp150.8.13.1
libisccc160-debuginfo-9.11.2-lp150.8.13.1
libisccfg160-9.11.2-lp150.8.13.1
libisccfg160-debuginfo-9.11.2-lp150.8.13.1
liblwres160-9.11.2-lp150.8.13.1
liblwres160-debuginfo-9.11.2-lp150.8.13.1

– openSUSE Leap 15.0 (noarch):

bind-doc-9.11.2-lp150.8.13.1
python3-bind-9.11.2-lp150.8.13.1

– openSUSE Leap 15.0 (x86_64):

bind-devel-32bit-9.11.2-lp150.8.13.1
libbind9-160-32bit-9.11.2-lp150.8.13.1
libbind9-160-32bit-debuginfo-9.11.2-lp150.8.13.1
libdns169-32bit-9.11.2-lp150.8.13.1
libdns169-32bit-debuginfo-9.11.2-lp150.8.13.1
libirs160-32bit-9.11.2-lp150.8.13.1
libirs160-32bit-debuginfo-9.11.2-lp150.8.13.1
libisc166-32bit-9.11.2-lp150.8.13.1
libisc166-32bit-debuginfo-9.11.2-lp150.8.13.1
libisccc160-32bit-9.11.2-lp150.8.13.1
libisccc160-32bit-debuginfo-9.11.2-lp150.8.13.1
libisccfg160-32bit-9.11.2-lp150.8.13.1
libisccfg160-32bit-debuginfo-9.11.2-lp150.8.13.1
liblwres160-32bit-9.11.2-lp150.8.13.1
liblwres160-32bit-debuginfo-9.11.2-lp150.8.13.1

References:

https://www.suse.com/security/cve/CVE-2018-5740.html
https://www.suse.com/security/cve/CVE-2018-5743.html
https://www.suse.com/security/cve/CVE-2018-5745.html
https://www.suse.com/security/cve/CVE-2019-6465.html
https://bugzilla.suse.com/1104129
https://bugzilla.suse.com/1126068
https://bugzilla.suse.com/1126069
https://bugzilla.suse.com/1133185


To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org

openSUSE Security Update: Security update for bind
______________________________________________________________________________

Announcement ID: openSUSE-SU-2019:1532-1
Rating: important
References: #1104129 #1126068 #1126069 #1133185
Cross-References: CVE-2018-5740 CVE-2018-5743 CVE-2018-5745
CVE-2019-6465
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________

An update that fixes four vulnerabilities is now available.

Description:

This update for bind fixes the following issues:

Security issues fixed:

– CVE-2018-5740: Fixed a denial of service vulnerability in the
“deny-answer-aliases” feature (bsc#1104129).
– CVE-2019-6465: Fixed an issue where controls for zone transfers may not
be properly applied to Dynamically Loadable Zones (bsc#1126069).
– CVE-2018-5745: An assertion failure can occur if a trust anchor rolls
over to an unsupported key algorithm when using managed-keys.
(bsc#1126068)
– CVE-2018-5743: Limiting simultaneous TCP clients is ineffective.
(bsc#1133185)

This update was imported from the SUSE:SLE-12-SP1:Update update project.

Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or “zypper patch”.

Alternatively you can run the command listed for your product:

– openSUSE Leap 42.3:

zypper in -t patch openSUSE-2019-1532=1

Package List:

– openSUSE Leap 42.3 (i586 x86_64):

bind-9.9.9P1-56.1
bind-chrootenv-9.9.9P1-56.1
bind-debuginfo-9.9.9P1-56.1
bind-debugsource-9.9.9P1-56.1
bind-devel-9.9.9P1-56.1
bind-libs-9.9.9P1-56.1
bind-libs-debuginfo-9.9.9P1-56.1
bind-lwresd-9.9.9P1-56.1
bind-lwresd-debuginfo-9.9.9P1-56.1
bind-utils-9.9.9P1-56.1
bind-utils-debuginfo-9.9.9P1-56.1

– openSUSE Leap 42.3 (x86_64):

bind-libs-32bit-9.9.9P1-56.1
bind-libs-debuginfo-32bit-9.9.9P1-56.1

– openSUSE Leap 42.3 (noarch):

bind-doc-9.9.9P1-56.1

References:

https://www.suse.com/security/cve/CVE-2018-5740.html
https://www.suse.com/security/cve/CVE-2018-5743.html
https://www.suse.com/security/cve/CVE-2018-5745.html
https://www.suse.com/security/cve/CVE-2019-6465.html
https://bugzilla.suse.com/1104129
https://bugzilla.suse.com/1126068
https://bugzilla.suse.com/1126069
https://bugzilla.suse.com/1133185


To unsubscribe, e-mail: opensuse-security-announce+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-security-announce+help@opensuse.org

AutorToni Vugdelija
Cert idNCERT-REF-2019-06-0001-ADV
CveCERT-CVE-DUMMY
ID izvornikaCERT-ORIGID-DUMMY
ProizvodCERT-DUMMY-PRODUCT
IzvorAdobe
Top
More in Preporuke
Sigurnosni nedostaci programskog paketa rmt-server

Otkriveni su sigurnosni nedostaci u programskom paketu rmt-server za operacijski sustav openSUSE. Otkriveni nedostaci potencijalnim napadačima omogućuju izazivanje DoS stanja...

Close